Wooden Karambit V.2

7,588

92

12

Introduction: Wooden Karambit V.2

About: I just like to make staf xD If you want to contact me just send me massage and I will give you my email.

In this tutorial I am going to show you how to make this karambit you see in picture up here.

Step 1: Get a Template and Print It

Step 2: Cutting

Cut the parts from the template and glue it to the wood then cut it.

Step 3: Glue and Sand Parts

You can use any glue for wood.

Step 4: Chose or Make Your Paintjob

Step 5: Painting

Step 6: More Painting

Step 7: Finishing Touches

Use nail polish or someting similar for the details

Halloween Props Contest 2015

Participated in the
Halloween Props Contest 2015

Be the First to Share

    Recommendations

    • CNC and 3D Printing Contest

      CNC and 3D Printing Contest
    • Rice & Grains Challenge

      Rice & Grains Challenge
    • Puzzles Challenge

      Puzzles Challenge

    12 Comments

    0
    That_Jamie_S_Guy
    That_Jamie_S_Guy

    7 years ago

    Cool :D I've seen the word karmabit around ibles, what exactly is a karmabit?

    0
    Dzefri
    Dzefri

    Reply 7 years ago

    Knife :-D

    0
    That_Jamie_S_Guy
    That_Jamie_S_Guy

    Reply 7 years ago

    Ah OK lol :D yours looks great!!

    0
    Dzefri
    Dzefri

    Reply 7 years ago

    Thanks man :-D

    0
    Kentish
    Kentish

    7 years ago

    I built this an hour after seeing it, it works great

    0
    Dzefri
    Dzefri

    Reply 7 years ago

    Could you post pictures of it? :-D

    0
    ajones97
    ajones97

    7 years ago

    Cool design but the blade is backwards no back edge for wrist locks. No good for silat drills.

    0
    Dzefri
    Dzefri

    Reply 7 years ago

    Thanks :-D

    0
    -eekhoorn-
    -eekhoorn-

    7 years ago

    whats the wood you used

    0
    Dzefri
    Dzefri

    Reply 7 years ago

    Plywood :-D

    0
    Dzefri
    Dzefri

    7 years ago

    Thanks :-D