Introduction: Xenon XR-15 Sniper Rifle 1.2

By Listen. Free 320 dubstep!
About: http://soundcloud.com/noiseknob/ajleece-noiseknob-n-d-e

This is my Xenon XR-15 Sniper Rifle 1.3. I features a long fake barrel, top rail, front and rear handle, stock and is true trigger.

Version History
1.0 Original Sniper. Very Weak
1.1 Extended barrel and added scope
1.2 Re-built handle and made better

Step 1: Top Rail

You will need a good eye but i have taken lots of photos to help you.

1 - Angled view.
2 - Side view.
3 - Front view.
4 - Rear view.
5 - Top view.
6 - Bottom view.
7 - Upside down angled view.

Step 2: Fake Barrel

Again, you will need a good eye but i have taken lots of photos to help you.

1 - Angled view.
2 - Side view.
3 - Front view.
4 - Rear view.
5 - Top view.
6 - Bottom view.
7 - Upside down angled view.

Step 3: Front Handle

This step is very easy to do.

Step 4: Barrel & Firing Pin.

This is the 'juice' of the gun.

1 - Firing pin.
2-5 - Barrel

Step 5: Hopper

This is a basic hopper.

1 - Make this
2 - They join here
3 - Join

Step 6: Rear Handle & Trigger.

This is the trigger and the handle

1 - trigger
2 - handle part 1
3 - make 2 of these
4 - handle part 2
5 - join pieces
6 - add trigger
7 - add handle part 2

Step 7: Making the Stock.

You will need a very good eye for this.

Step 8: Assembly

Time to put it all together.
Follow the notes

Step 9: Elastics

Time to place the rubber bands

Step 10: Firing

First put a blue rod in the hopper, pull back the firing pin and pull the trigger