Bolt-Action K'nex Gun

Introduction: Bolt-Action K'nex Gun

Here's a really quick, easy, and good K'nex gun you can make. It's very powerful, and shoots far and fast. Let's begin.

Step 1: The Clip (1/2)

This is how to construct the top half of the clip. Parts list included.

Step 2: The Clip (2/2)

This is the bottom half of the clip.

Step 3: The Handle

This allows you to hold the gun without it being akward. I find it very comfortable and sleek.

Step 4: The Ram Rod

This makes the bullets go out of the gun. (Like you didn't already know that)

Step 5: Trigger...Safety...Thing locks the ram rod back and then releases to fire, so call it what you want.

Step 6: The Barrel

Ah, yes...the barrel. The hardest thing to build on this gun. Don't worry, though. This tutorial is foolproof. You'll be fine.

Step 7: Assembling the Clip

We combine the two clip pieces together.

Step 8: Assembly (1/3)

Attatching the handle to the barrel.

Step 9: Assembly (2/3)

Clipping the clip to the barrel.

Step 10: Assembly (3/3)

Inserting the ram rod.

Step 11: Rubber Band Placement

This is how to attatch the rubber band.

Step 12: Loading/Reloading

How to load the gun.

Step 13: Firing

Yes, the fun part! Now we can shoot the gun, muahaha!

Step 14: DONE!!!

Well, you're finally done. This should've taken you no more than 45 minutes. Happy shooting!
[P.S. This easy easy to dissassemble, if you want to make a different gun or something.]

Mod this gun! See if you can make it better!

Be the First to Share


    • Exercise Speed Challenge

      Exercise Speed Challenge
    • Pocket-Sized Speed Challenge

      Pocket-Sized Speed Challenge
    • Audio Challenge 2020

      Audio Challenge 2020

    5 Discussions

    Mr. Muggle
    Mr. Muggle

    10 years ago on Introduction

    I don't think this thing shoots far with a magazine and 1 rubberband. Also you should add a pusher, magazines fail sometimes without a pusher. I like the looks of that magazine though