Watch Full Video Here: https://www.youtube.com/watch?v=saar466QJag
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Tools You Need to Make This Mouse Car
I used some tools to make this mouse car:
- DC Motor
- Glue Gun
- Computer Mouse
- Pop Sticks
Step 2: Make 2 Wheel
Now make 1 wheel using wheel, straw, sticks, pinium and glue gun. See the picture
Step 3: Attach 2 Wheel
Now attach 2 wheel with pop sticks and glue gun.
Step 4: Attached DC Motor With Wheel
Now attached DC Motor with 1 wheel which have pinium and must add properly with wheel pinium and motor pinium to run this car. See the picture.
Step 5: Attached Battery With Car
Now attached battery with DC Motor and pop stick in the car using glue gun. See the picture.
Step 6: Cut Cable From Mouse
Now cut cable from mouse using Seassor.
Step 7: Add Glue in Mouse
Now add some glue at the back side of the mouse, see the picture.
Step 8: Attached Mouse With Car
Now attached mouse with car, see the picture if u don't understand.
Step 9: Check Properly What You Did
In this stage check properly that you did properly in every steps and you are almost ready to run your car.
Step 10: Connect DC Motor and Battery
Now connect DC Motor and battery to run your mouse car.
Step 11: Now Your Mouse Car Is Ready to Run
If you follow every steps properly your Mouse car is ready to run and enjoy it.
Like and Share this with your friends and make this mouse car for your kids.
If you don't understand any of the steps. You can watch my full video here: