K'nex M4A1

5,779

4

61

Intro: K'nex M4A1

####(For Version 2, Click 7th step.)####This is kinda like Fartonia's M4A1 This gun doesn't shoot but other than that it has a removable clip, reloading pully thing and an iron sight :D! Check it out, if you have any questions let me know :D!

Step 1: Removable/Detachable Clip

Pretty simple, notice the fact that you gotta bend some stuff to make it look "realistic"

Step 2: Tip/Handle/Barrel

Kinda complicated for the tip area, but if you have any questions, just let me know

Step 3: Stock/Butt


Step 4: Trigger/Handle/Mag Holder

Kinda tricky here too but you'll get it, i know you will :D!

Step 5: Body

any questions? comment or send me a msg :D!

Step 6: Attachments

Easy peasy Lemon Squeezy XD lol sounds wrong

Step 7: Lowering the Pulling Thing (V2)


Okay you need to read very carefuly. You see how on the pull back mechanism, there are 2 connectors. Grey or purple. one is up and the other 1 upside down. Replace the Grey/purple connector with a Orange Connector. the one that looks like a ladder? i call it the ladder connector. So The connector with 1 hold and 1 conector spot. replace it with a Ladder connector. When you are done Just attach the Mechanism on the bottom of the ladder.

Share

    Recommendations

    • Tiny Home Contest

      Tiny Home Contest
    • Audio Contest 2018

      Audio Contest 2018
    • Furniture Contest 2018

      Furniture Contest 2018

    61 Discussions

    0
    None
    KnexGeek17

    4 years ago on Introduction

    This gun is pretty nice! i just need to find a way to make it shoot

    GREAT JOB ZeroGravity9! I built this gun and it is GREAT! I see that people are saying that it is flimsy, but I don't think it is...

    0
    None
    kusstemz

    6 years ago on Introduction

    it is cool, some filling would make it better, dont take it to heart kid. its toys we are talking about. take the criticism as an insight to make it better. if you dont have enough parts, try and make a smaller more powerful gun. Good job though

    0
    None

    Fill it in, then it looks good. Btw: what does an cocking handle do in an carrying handle?

    0
    None
    hbk0798

    7 years ago on Introduction

    I dont know guys this kinda looks more like an m16 than a m4a1
    defienetly pretty cool model though :)

    0
    None
    black ops

    7 years ago on Introduction

    its good nice model i built it i modded the mag handle cocking system iron sight and even made a grip reflex acog red dot sight and silencer say it if i make instructables for a sight

    keep going on

    0
    None
    knex inventor

    7 years ago on Step 7

    its good i have built it and will subscribe. but look on youtube for a better pully design(cocking handle)