TZ -1,000 Knex Ten Shot Pistol

Introduction: TZ -1,000 Knex Ten Shot Pistol

Here it is the one the only TZ 1000!!! This amazing gun has a ten shot magazine that has never jammed over the hundreds of times I have shot it. Also it will shoot 35-40 feet and can pierce a box at 3 feet with one rubber band.

PROS:
Sturdy
light weight
10 shot mag that never jams
can shoot 35-40 feet with one rubber band
can pierce a box at 3 feet with one rubber band
good looking
true triger

cons:
uses a decapetated orange connector.

Tell me what you think

Step 1: Magazine

Okay here we go. To start off we are going to build the magazine.

Step 1: build both

Spep 2: build both

Step 3: add white rods

Step 4: add parts you made in step 1

Step 5: add second panel and you are done with the mag

on to the next step >>>>>>

Step 2: Handle

Now the the handle.

Step 1: build both

Step 2: build

Step 3: build

Step 4: add yellow and blue rods

Step 5: add both parts

Step 3: Trigger

Okay now this is easy. Just build it

Step 4: Barral

Now I tried to make this as easy I can.

Just follow the pictures.

In the 4th pic cut where the yellow box is.

Step 5: Mag Pusher

just build

Step 6: Firing Pin

okay last thing to build the firing pin. You need to use the black rod for the firing pin because it is stronger. I mean you don't have to but it will make the gun stronger.

Step 7: Putting It Together

Okay almost done.


Add mag

Add handle

Add trigger

Add ram

Step 8: Loading and Firing

Okay we are done. Now just load the bullets and put the pusher in. It is now done. Just pull back the pin and fire!!!


If you have any questions please use my orange board.

Be the First to Share

    Recommendations

    • Mason Jar Speed Challenge

      Mason Jar Speed Challenge
    • Pumpkin Challenge

      Pumpkin Challenge
    • Bikes Challenge

      Bikes Challenge

    36 Discussions

    0
    st j
    st j

    10 years ago on Step 5

    Groovy

    0
    DB2016
    DB2016

    Reply 9 years ago on Introduction

    Noob. Don't comment so many times in a row.

    0
    AwesomePossum50
    AwesomePossum50

    9 years ago on Step 7

    I'm confused about adding the trigger. Can anyone explain to me how to do it?

    0
    AwesomePossum50
    AwesomePossum50

    9 years ago on Step 6

    What is that white thing in between the orange thing and grey thing?

    0
    st j
    st j

    10 years ago on Step 4

    u could use a black ball joint socket. or a cut up grey connector. I use ball joint socket.

    0
    st j
    st j

    10 years ago on Step 3

    good a step that doesnt hurt ur thumbs. Phew. :)

    0
    st j
    st j

    10 years ago on Step 2

    im getting there... i think but my thumbs are kinda sore cus ive made 'nother gun already today. ouch. :)

    0
    spottyplotty
    spottyplotty

    10 years ago on Step 8

    superburb instructions i hav made most of ur stuff and this is 1 of the best thanx

    0
    detroct
    detroct

    11 years ago on Step 7

    how does the trigger work to keep it from firing once you've loaded (cocked?) another bullet to fire?

    0
    knex_mepalm
    knex_mepalm

    Reply 10 years ago on Introduction

    the triiger blocks the ram, itd different in real life and knex

    0
    detroct
    detroct

    Reply 11 years ago on Introduction

    the small black or green pieces

    0
    detroct
    detroct

    Reply 11 years ago on Step 4

    the orange piece