Introduction: My Version of Killerk's SR-v1
i can't say it is a mod because it is a lot different
i did use I like it's trigger mod
and sorry about the bad pics
there are 89 yellow connectors ( for v1) in this gun
please rate
1.v1
2.v1.2 no instructions ( might show how to make the bigger barrel)
3.v1.3(not as many yellows needed as killerk and still same size) ( will post if people want )
(all three can use i like its's or killerk's trigger
good:
powerful ( it hurts )
good aim
good range( 40-120 feet)
bad:
v1 and v1.2 can bend and break
breaks rubber bands fast
ammo can fly back at you
not safe ( like anyone cares)
trigger can get stuck
some times hard to load
(\_/)
(o.o)
(> <)
here is a bunny
Step 1: The Handle
it is pretty straight forwarder
blue rods: 4
yellow rods:2
white rods: 12
green rods: 24
yellow connectors:19
red connectors:2
light gray connectors:2
green connectors:6
gray connectors: 1
orange connectors:3
blue spacers:2
Step 2: The Body and Stock
it is mostly easy
blue rods: 5
yellow rods:8
white rods: 22
green rods: 24
yellow connectors:24
red connectors:4
light gray connectors:2
green connectors:4
orange connectors:12
Step 3: The Barrel
it is the biggest part of the gun
and there are
yellow connectors:43
( i dont have time to count the other parts)
Step 4: Scope
just build the pics
Step 5: Bipod
yes i did make i snap up
but it is the one killerk made
Step 6: Put It All Together
just do what it shows you
Step 7: Loading
is is really simple