Knex Transmition

Introduction: Knex Transmition

knex transmition that has neutral first and second gear and its my first Instructable

it has
1 motor
3 red gears
3 blue (and i have one gold) gears
2 two slot connectors
5 silver spacers
16 blue spacers
4 white connectors
6 tan connectors
8 purple slot connectors
4 blue slot connectors
3 red connectors
6 green pegs
8 white rods
1 yellow rod
7 blue rods
1 red (or green) rod
1 grey rod
total=79 pieces

Step 1: The Main Box

for this step you must make the main box that holds the gears together.

Step 2: The First Gear

This is the first gear with the motor attached to it.

Step 3: The Second Gear

this is the second gear to be made which has the actual handle to change gear.

Step 4: The Third Gear

This is the third is the last gear to make.

Step 5: Putting the Final Parts Together

This is the final step where you put everything together.

Step 6: Speed

It should be very fast in second gear and slow in first gear to make first gear slower and second gear faster take out the final gear.

Be the First to Share

    Recommendations

    • Make It Bridge

      Make It Bridge
    • Big and Small Contest

      Big and Small Contest
    • Game Design: Student Design Challenge

      Game Design: Student Design Challenge

    69 Comments

    0
    MuslimTech
    MuslimTech

    8 years ago on Introduction

    Please please please can you make a video of it working!

    I don't get how you switch gears.

    Also can you add a clutch.

    0
    zmxninja
    zmxninja

    11 years ago on Introduction

    nice; i like it, i just came here to ask if anyone could help me encasing my transmission plz;

    0
    Rockrox
    Rockrox

    13 years ago on Step 6

    This is a very good instructable. It works well. Just so everyone can know, a silver spacer is the same as three blue spacers. I really like this. the only problem I have with it is the fact that the pictures exclude some parts (the corner of step one) but all else is good

    0
    Rockrox
    Rockrox

    Reply 13 years ago on Introduction

    Well maybe some people don't know that a silver spacer is equal to 3 blue spacers. Don't give negative comments to people who are just trying to help out. not all sets include the silver spacers. next time, think before you speak.

    0
    Owenmon
    Owenmon

    Reply 13 years ago on Introduction

    How is it negative? I was just congratulating you.

    0
    Rockrox
    Rockrox

    Reply 13 years ago on Introduction

    usually "Bravo! Sherlock" is a term used when someone states an obvious fact. That is negative.

    0
    TomCat1
    TomCat1

    13 years ago on Step 6

    BRAVO. WORKS WELL. CAN YOU TELL ME HOW TO MAKE IT FASTER?

    0
    knexfreak93
    knexfreak93

    14 years ago on Introduction

    are the blue gears and the golden gears the same because i don`t have any blue gears

    0
    Rockrox
    Rockrox

    Reply 13 years ago on Introduction

    yes, but they are a little loose. well at least mine is. the little grey ones won't work because they don't have a place for the tan pieces to go into

    0
    husbag3
    husbag3

    13 years ago on Introduction

    i made this then did something similar with 3 speeds but it has no neutral

    0
    ojochris
    ojochris

    14 years ago on Introduction

    does it have to be that motor? (i dont have 1)

    0
    robocrazy155
    robocrazy155

    Reply 14 years ago on Introduction

    It's a motor from the knex amusement park kit with the 3 ft tall ferris wheel

    0
    feralin
    feralin

    13 years ago on Introduction

    you made mistake in parts list: it is not 7 blue rods, it is 9 blue rods