Wood Yogi

Thank you my friend :) It dosen't matter how they look as long as they do the job :) I would love to see how it looks. If you can post a picture that would be great.

Thank you, I'm happy that you found it useful :) I'm from England and the word Vice has a few meanings, one of them is a clamping device. I always try to include American and UK English if possible to help as many people from different English speaking locations to find the project :)

This is a fantastic tutorial and just what I was thinking about searching for. You just saved me a lot of time. I will be very interested in any other vegetarian instructables you make :)

Hi Jadem52 :) I have video of one i demonstrated not too long ago. It is almost identical to the ones above :) I keep one on me all the time and people love to try them :)

Thank you my friend :) I have entered it into the contest :) ॐ

Thanks Dwargh, It sounds like a good idea. I'm sure a small diamond file would work :) I use this gauge on a daily basis using the ruler method and it works great, but I may try a cutter with measurement marks in the future.

Thank you Mikhandmaker :)

Thank you :)

I have started woodworking and woodturning in the last couple of years after a long while away from it. Most of my tools are secondhand or self made. It's good to try and find older quality tools and restore them if they need it. It takes time, but it's definately worth doing :)

Small pieces from my firewood pile also :) There are many sources for free or low cost wood. A couple of years ago, I thought I would never have enough for projects, but now I have a lot of wood stored. Ask someone you know with a woodburning stove or heater if you can rescue a few pieces from their pile. Also good to ask carpenters or anyone working with wood for scrap or offcuts, you will be surprised at the amount of stuff thrown away.

Thank you :)

Thank you :)

Great :) Please let me know how it work out.

Hi bruce.desertrat,I planned to use those inserts, but the threads cut into the wood are really strong and hold the cutter in position well. The cutter marks a line without much pressure at all, so an insert is not really needed although it will add strength and look nicer too :)

Thank you :) The one I made for myself now belongs permanently on my workbench :D

The plans are not free, but for what you pay they are worth it. It's not a difficult machine to build. You can check out the plans and more information at his website here.http://woodgears.ca

Thanks again for the information. I forgot to mention that the belts can also be mounted in any direction. It saves any confusion or mistake as can be made with the overlapped joint as you mention, especially if the arrows become obscure over time as can be the case.

The plans are not free, but for what you pay they are worth it. It's not a dificult machine to build. You can check out the plans and more information at his website here.http://woodgears.ca

I would really like to know if you manage to try it out and how it works. if I can manage to locate some tape I will definitely give it a go. The first one I made was without the epoxy to strengthen the edges and it still survived a long time only to tear down the centre after a lot of use and the joint remained intact.

The tried to order belts from the only company that I could find advertising them and they told me I would need to order them and wait a considerable length of time. the cost of 5 belts was 32 Euros plus shipping costs. I made 6 belts for about 14 Euros after the cost of materials. I could have made 12 belts for about 20 Euros if I would have bought the sandpaper as a 3 meter length instead of a 2 meter length. i hope this information is helpful. thank you for kind comment on the machine :)

The machine was made from the plans by Matthias Wandel. The plans are really easy to follow and the machine works great. It cost me around 10 Euros for materials including the drive belt as I already had a motor.