Introduction: Blast From the Past: Knex EZM (Experimental ZKAR Mod)

About: I first joined this site in 2008 when I was a bored ignorant teenager with a lot of free time on my hands. Now as of 2019, I’m 23 and in graduate school so I’m permanently inactive here. If you still want to k…

This is one of my older projects that I have not published on ibles until just now.  This project is basically an original take of the ZKAR, replacing the bolt on it with a handle pump.  It's about 11 layers thick in the handle pump part, but it's still fairly lightweight and portable.  The handle has knobs on it to make it comfortable, and the stock is curved to conform to your shoulder, and you can reload the mag with a breach in the side due to a mag mod bitz came up with.

I re-created the handle and took pictures of it.  I make no guarantees that it is accurate, although I tried my best to make sure it was.  The gray rod serves as the bolt in the gun, which pushes a bullet from the mag into the chamber.

I had internal pictures, but unfortunately lost them because of a glitch at KI.  I had to remove the photos from my computer in one of my periodic clean-ups to save space.  However I do have a video of it in action: