Introduction: Wire Lightbulb Earrings
These earring are awesome for any event or just for everyday wear.
Supplies
- Wire
- Wire Cutters
- Earring
Step 1: Create a Coil in the Wire.
Create a coil with three rings in the wire with the wire. The coil should be close to the end.
Step 2: Make a Figure-8.
Fold the short end up along with the long end and make a figure-8 with the long end of the wire.
Step 3: Wrap the Excess Around.
Wrap the excess wire around the middle.
Step 4: Make Two of Them
Repeat the steps again for the second one.
Step 5: Attach Hooks
Attach your hooks to the top smaller part and you are done!