I had an idea for a custom Lighted wall sconce. Had some metal sconces that I hadn’t planned on using but decided to build and stain some wood pieces to hang them on.
Step 1: Cut Boards
I used 1x4x8 boards and 1/4 inch panel board. I cut to desired size and nailed together using 5/8 inch nails.
Step 2: Install Hanging Hardware
Installed hanging hardware on back
Step 3: Stain
I stained using weathered grey stain
Step 4: Check
I checked placement of metal sconces I planned to attach to front.
Step 5: Silver Wax
I brushed on silver wax
Step 6: Dark Wax
I brushed on dark wax
Step 7: White Wax
I added white wax
Step 8: Sand
I sanded and prepared for one last coat of white wax
Step 9: White Wax
I added white wax and mounted metal sconces to the front.
Step 10: Finished
Hung on wall and hung lantern from it.