How-to-take-didgital-pictures-with-a-crt-monitor is lieing tutorial i think and how to discharge monitor vacuum did everyone tried personally!!!
Question by h0meIandsecurity
Scope screen for sale! I had an old osiliscope and I had taken out the screen. the last time before I had taken it apart the screen worked. I have started working on another project and now I have run out of funds for it, so now I am figureing this screen I wanted to play with, might just get me enough funds to finish my project. I need at least $30 for the screen, thats with shipping! I feel a little sad to have to part with it.... but I really want to finish my new project.
Topic by inductionheat!
I'm thinking of cutting the phosphorecent screen off of a CRT and seeing what effects I can produce by shining some high intensity UV light on it. Removing the screan is going to be tricky since the entire CRT is a vacuum on the inside. I know I'm going to have to be really careful and let the pressure in slowly or it could implode and send shards everywhere, but I'm also worried about what dangerous substances might be in the CRT that I could expose myself to. Does anyone know if there is a danger of lead/mercury/etc on the inside of the CRT, and what safety precaussions I can take?
Topic by kramerr
I am planning on buying some classic consoles soon, (NES,SNES,SEGA Genesis,N64, etc) and I want to be able to play them on the kind of screen they were made for, a CRT. I have one that a friend gave me, but due to being moved a lot, and probably not gently, the picture has fallen out of alignment. Specifically it cuts off a large portion of the screen on the left, (leaving a thick space of black on the right) and is at a slight angle. It is not all that big of a shift, but it is a real pain in games with items in that section, because ammo counts, health bars, treasure chests, and even chunks of text can be hidden in that space. Could anyone tell me how to fix this issue? And how hard it is to do?
Topic by Damnation | last reply
i have a 21" TV lying around and an old CRT monitor. basically i want to use the CRT monitor as the TV in my bed room. the old 21" TV is not working but the CRT monitor is. is there any way I can use the monitor as a tv without the computer? since the monitor cannot be directly connected to the cable i need a way to use it... pls help.
Question by para p | last reply
Would like to separate the two pieces of glass that make up screen. Does anyone know how to do this? Can you remove epoxy that is holding them together.
I broke apart my Tv set and literally smashed the screen with an axe. Why? Because there was nothing good on. But anywho.....I heard there is lead and other bad stuff in the glass so i am a little worried that i breathed some of that in. Also, i love the look of the glass and would love to use it in some art projects. Is it safe to work with? Thank u.
Topic by valmont325 | last reply
I had an idea to saw the glass tube projecting off the back of a CRT picture tube (the part that has the pins on the back and surrounds the electron guns) that I have lying around and put it in a plexiglass case or something cause it would look cool. I need to know if there are any dangers in doing this that remain after the obvious things such as discharging the tube and breaking the seal on the back of the neck. I do know that the screen is coated with a phosphor that is not good for you but this should not be an issue because i am not going to be working with the actual screen part right?
Question by UbuntuNinja | last reply
I found four CRT TVs in the garbage around my house; I've already torn out the flyback transformers, the motors from the tape decks, and the speakers. I was wondering if there were any more parts I should be interested in scrapping before I take them down to my local recycling center. So, are there?
Question by Brekenridge | last reply
I have for sale here a late 1980's Barco Cine600 CRT projector. Powers up ok but I've no idea how to plug anything into it. I can imagine in the right hands there is nothing wrong with it, but i'm no expert so sold as seen £200 I'm in South England and can deliver it anywhere in a 25 mile radius from Salisbury in Wiltshire. £200
Topic by tobychan | last reply
I have a panasonic omnimove camcorder viewfinder that I took apart and plugged in and got it running. It is running on about 5.5 V DC, seems to work, but its very squiggly, like the horizontal or vertical hold is off. when I plug in video from my VCR I can see the image, but it is really squiggly. does anybody know how to adjust this? could i have aything to do with the voltage? Thanks!
Topic by mushroombob | last reply
I acquired a pair old crt camera view finders from an electronics surplus store, but before i go hog wild with my soldering iron i have a couple questions. how many amps dose one of these things usually draw? will goofman's mini tv instructable work with any crt or do some crt's not work?
Topic by clasic_traveller_diehard | last reply
It would be great if it is, because I have 2 or 3 around and want to make the electric levitation device.
Question by XOIIO | last reply
I turned my monitor on this morning to be greeted to some weird shit. Apparently everything towards the bottom is squished and the top is stretched out. It's not really bad but you can definatly notice it and I'd like the know why it was fine last night and not this morning. I degaussed it and nothing, any ideas? Or has this thing finally bit the dust?
Topic by Punkguyta | last reply
I've got a 19 inch flat screen crt monitor hooked up to my mac. And when I play my music really loud, the image almost shakes like it would if I had the stereo hooked up to the power bar with it like it used to be. The stereo is on it's own breaker right now, but is it doing that from the actual vibration of the picture tube or is it dieing on me?
Topic by Punkguyta | last reply
Hello! I'm getting a bit tired of playing with disposable cameras... there's only so much you can do with them. Well, I acquired a CRT, presumably from an oscilloscope, a couple of weeks ago and I want to get the flyback out of it (and figure out how to use it) so I can make a Jacob's ladder or Tesla coil. Does anyone have any ideas on how to proceed? Here are some pictures.
Topic by SirCheez | last reply
I have huge 21 inch crt monitor which i found yesterday in the trash i plugged it in now. it works but the image has some distortions the color that should be black is bright gray and all other colors are like addition to it. the image looks very bright and with bright gray tint. setting brightness and contrast to minimum does not help much there are some kinda scratch lines across the display. the lines form a shape of a 'lightning' with horizontal lines and diagonal that connect them. the density of lines is higher when i switch to higher resolution the image size is severely affected by the brightness of what is displayed. it grows larger about 1 cm on each side when i open a window with white background other than that the monitor works ok in all resolutions from the bios screen and up to 1600x1200 what can be the problem ?
Topic by 11010010110 | last reply
I was tearing apart an old VHS camera and decided to rip the LCD out of the viewfinder. Much to my suprise I find a CRT monitor not a LCD! This screen is about 1/2 inch. It has a 5 pin connector that leads to the motherboard and a chip on the bottom that says A118121. Obviously two of the conections would be V+ and ground, but what about the other three? I would like to turn this into a composite or VGA compatible screen (maybe even a crazy tiny oscilloscope) but I need some help. Any suggestions or leads would be greatly appreciated.
Topic by gimmelotsarobots | last reply
It's lying around. I don't have enough room on my desk to use it as a second monitor. It'd be cool to have it doing some sort of visualization or lighting effect. Is the tube useful for anything? I'm game for it all. Thanks!
Question by curtisseligson | last reply
I have a TV that is in a place where the remote will not work (Dont ask its complicated lol) and I want to rewire the ON/OFF switch on it so that it will be like a foot or two away from the tv. Do I have to discharge the CRT on it before I work on the ON/OFF switch which is only attached by wires to the CRT and flyback transformer circuit. Could I just wear some thick rubber gloves to work on this because Ive never discharged a CRT before and have no interest in doing so.
Topic by jackillac92 | last reply
I'm working on an art piece and i just reckon it'd look a whole lot better and 'fit' better overall, but i'm wondering if somebody accidentally brushing up against it or touching it could turn out badly.
Question by potatosaur | last reply
Is there any guides on how to do it?
Question by madrobot3600 | last reply
apart from hacking an old camcorder. preferably PAL but NTSC is ok
Question by Barramundi | last reply
I'm looking for a good tutorial to take an old CRT computer monitor I have and turn it into a clock. I've seen it done on websites and youtube and want to try it out myself.
Question by emtffkev | last reply
Its a 5 cm long CRT monitor, im guessing a native resolution of 640x480, its got four connecting wires at the very end, its a pretty cool looking piece, i read somewhere this guy ran xp through it, so i was wondering if it could be used for something like that, a hud of some sort probably. any clues?
Question by blckthng | last reply
I've got two CRTs for parts, as well as a 20" LCD tv, whose screen is toast. What can I do with them/their parts? I've thought of a guitar amp project with the lcd (speakers/amp of the tv) but that seems like a waste, if there's more great stuff that I can use them for. I know CRTs have tons of stuff to salvage...just not sure how to rip it all out (both CRTs have been unplugged for >month, so their capacitors should be safe, right?) There are a million ibles I want to work on, so I thought I'd see what I could do with what I've got....I don't have enough lights or fans...just these monitors and tv for now. So, what would you do if you were me? Ok, thanks!?
Question by sykotik | last reply
I have recently come across a panasonic wv-vf01 crt viewfinder. i dont know the model camera it was from, but i Would like to drive it. i have already found video, i just need the voltage and pinouts. it has a 6 pin connector. and i plan on hooking the crt to my raspberry pi and show the time on it
Topic by devicemodder | last reply
I thought of an idea for a cheap graphics tablet type devicefirst read these 2 pagescathode ray timinglight penthe idea is to find a way to rig up a light pen(i don't think they sell them any more) and to use a cheap 5in b/w tv as the surface or mount a crt monitor in a cabinet at a drawing desk angle please give me feed back
Topic by clasic_traveller_diehard | last reply
I have broken the primary & secondary coil pins of a fly-back transformer and i need to repair it. can anyone help?
Question by ferraririder123 | last reply
Is it worth it to take the electron gun out of a CRT when salvaging parts? I've seen people remove the electron gun when they take apart the CRT but I don't know what they'd use it for. What can you do with a CRT electron gun? What chemicals does the gun contain? (I know the screen has toxic phosphor and stuff but I'm talking about the gun itself). Also, is it safe to vent a CRT tube? I have found that you should vent the CRT tube before working on it, by smashing the end from a distance, so that it won't implode if you happen to break it when working on it. But is it safe to puncture open the tube? There are toxic phosphors inside and I worry that venting it could cause toxic chemicals to go airborne.
Question by poiihy | last reply
I have a small Homeland Security system monitor (model number 01875) that I accidentally powered with backwards polarity. Now it doesn't turn on. How can I fix it?
Question by Ethanal | last reply
What I want to do is remove the phosphor screen of a CRT and see what happens if I hit it with intense UV light. I know I've got to look out for high voltage, and that if I don't let pressure into the vacuum very slowly with a small hole the glass will shatter and spray shrapnel everywhere. I'm also concerned about mercury/lead and any dangerous chemicals I'll be exposing myself to. Can someone explain the dangers and what I can do to avoid them?
Question by kramerr
Hi all, I have taken apart an old color crt monitor which was not working and I don't know how I could reuse the crt from it, I have a feeling it still works and that the problem was the flyback transformer, and would NOT like to throw away the crt. I would like to know if anyone knows how to drive a crt, without having to do something TOO complicated, I will be happy with very minimal results such as just a blue color being displayed, or such, as long as something gets to appear on the screen. Then I can use the x and y axis controls (the little plastic carrier on the neck of the crt) to control the image sizes. I heard that you have to find out which pins of the crt are for the filament and provide around 6V to it, but how do you find this out? Also if someone knows how I can test the flyback to make sure that is the problem, it would be helpful. Any help is appreciated. Thanks in advance, P.S. Attached is a picture of the crt.
Topic by drresearch | last reply
Which would be easier to use in a circuit:the CRT of a TV set to hold a massive amount of electrical charge-or-a capacitor with a similar amount of holding capacity (capacitance, if I'm correct)?If it's the CRT from a TV, how would one go about using it as a capacitor?
Question by robotguy4 | last reply
Ive been happily using my computer for...3year or so. But Ive heard a high pitched(say near 5000hz) spark sounding noise(like when you rub your had in front of a tv as soon as you turn it on) from the back of the monitor and that same instance the screen slightly darkened. It a Sony CRT Monitor i don't know what is going on but its like the third time it happens Edit:Its happening more intense now whats going on?
Question by ReCreate | last reply
Hi. I recently took apart an old CRT and removed the flyback to experiment with the high voltage output. Unfortunately, the core cracked when I was working with it. A sizable chunk even came off, but I reattached it by carefully fitting it in the slot and gluing it in place. Now the output voltage is much less spectacular from which I have seen other people do with the same transformer! It works, but I think the damaged core is where the problem is coming form. Does anyone know how to repair it better then what I managed to do? Thanks!
Question by transistorguy | last reply
I would like to make an analog clock that displays on an oscilloscope using an arduino. Is this possible? and i would like some help with the code.i will also have buttons to set the clock. the picture is what i would like to do with my arduino
Question by devicemodder | last reply
I have a jamma wired cabinet with power supply at 5 volts.i have a 25" monitor with an icade 60 in 1 pcb.i need to know how to connect everything.neither the monitor or pcb is hooked up.i have little knowledge in this field but im willing to learn please help!!!!
Question by phill2 | last reply
I plan to move out into my shed soon and there is an old CRT monitor which im hoping i can use as a tv just need to know if it's possible
Question by chibiwind | last reply
So I was looking around one day and found and old Compaq presaio CRT. I brought it home to take it apart for the flyback transformer inside.I found two screws on the side and unscrewed them. The monitor wouldnt open and I thought there may be more screws and took off the labels (to check for hidden screws) and couldn't find any .Prying the case open didn't work either. Has anyone Opened/fixed one and knows how to open it? Are there plastic tabs that lock the monitor together?
Question by joeismydad | last reply
MY VGA CABLE OF HP 7650 CRT GOT SPOILT. NOW I HAVE ANOTHER VGA CABLE FROM A DEAD MONITOR BUT THE INSIDE PIN CONFIGURATION CANNOT MATCH. IS IT POSSIBLE TO CUT THE WIRES AND LOOP THEM DIRECTLY TO THE FITTING PIN HEAD OF THE SPOILT VGA CABLE?
Question by mauricewarebee | last reply
Hi all i have hacked up an old camcorder to get the CRT off it and i am trying to make a scope for my buddy in the reserves, i cant seem to get the video source to work.. ive seen people play gamecube and all kinds on them and i tried using a cut up wire from a dvd player output to it but no luck.. please help ive managed to find out that the pink and red wire are my positive and negative so i can light the screen
Topic by phunky_phantom | last reply
I saw this hack on the MAKE blog yesterday, and it reminded me of a project I wanted to try a few years ago: a computer monitor like the one in the movie Brazil (pictured below). This device appears to be a small CRT screen behind a large Fresnel lens. The lens is easy enough to find in the form of a reading-magnifier, but it was the screen that puzzled me. I couldn't figure out what I could use that I could hook up to a computer. I thought about hacking digital picture frames, but they wouldn't have the cool curved look of an exposed CRT. When the post on MAKE came out, I thought that maybe the screen he used from a Coleman Lantern/TV (which are pretty easy to find on eBay) would work, but I'm not sure. So my questions are these: 1.Could I use this as a computer monitor using similar methods as in the blog post or a different way? 2.Would it be a problem that the TV is black and white? 3.If it's possible, is it likely that an electronics amateur like me could do it? I have experience in circuit bending and blinking LEDs with Arduinos, but little else. This is the deciding factor for me if it is truly possible, I don't want to take on something well out of my skill range. I realize that even if I did succeed, it wouldn't be very useful, but I'm still interested. Is it possible? Thanks, Noah
Question by noahh | last reply