How much is granite worth?

So today I went down to some local woods with a hammer (Geode,granite,marble hunting) and I saw that 2 friends of mine had dug up a 20-30 pound rock. It was a heavy little bugger. So I swung the hammer at the rock for half an hour until I had about 30-50 small chunks of granite. The main reason I broke it was so that me and my friends could split it. One of my friends didn't want it. The other friend wasn't allowed to have it. All that was left was me. So I then realized that it was way too much to carry around. So I told another friends that didn't help do anything but polish the freaking thing with a brush *pauses and laughs* that I would give him all of it but 3 peices. I'm starting to regret saying that. So I wanna know... is granite worth anything/expensive?

Topic by Flumpkins   |  last reply


Apexstone Amoy Marble & Granite

Pexstone Amoy Marble & Granitehttp://www.apexstone.net6th floor, Guangxing Building, 466 Nanshan Road, Xiamen 361006, China厦门市湖里区南山路466号广兴大厦6楼 Tel:+86 592 3761099Fax: +86 592 3761099Email: apex1@apexstone.net 公司类型:生产主营业务:Stone Slabs,marble&granite; slabs , granite tiles, countertops, vanity—tops企业行业:建筑、装饰、房地产 >> 建筑材料Apexstone Amoy Marble & Granite,a Xiamen,China based manufacturer and exporter of worldwide marble , worldwide granite , china granite, china marble , sand stone, travertine, limestone, Our range covers slab, tile, countertop, vanity top, tub surround, soap dish, sink, fireplace mantel, stone molding, mosaic, medallion, drawer knob, for interior designers; fountain, sculpture, statuary, stone carving, urns and vases, for decoration specialists; lite panel wall cladding, column, baluster, railing, step, garden furniture, paving stone, for architects; on commercial projects or industrial constructions.

Topic by apexstone 


scratches on polished marble,granite?

Hi, An electrician put a five gal. pail with tools on the tub surround and put surface scratches on it. The surface is polished to a shiny sheen.The marble co. I asked about the repair said they'd send a 2 man crew-I don't need the expense right now- Any suggestions? Thanks

Question by timesaverhandyman   |  last reply


A house with granite countertops and limestone tile backsplash, should the granite countertop go part way up the wall?

I remolding a kitchen using granite countertops and limestone tile for backsplash and trying to determin the best place to end the end the granite.  I've seen pictures of both with the granite extended about 4 inches up the wall and with the granite stopping at the wall.  Which is best?

Question by atasc   |  last reply


how to place wood trim around granite counter?

I have a granite counter with curves and I want to put a wood trim around it

Question by rankins_1   |  last reply


I want to make fake granite. Seen the retaining walls along the road turned into faux granite outcroppings?

I've seen some really realistic-looking fake granite. There's a hotel lobby filled with a 'granite' water feature, and along roads they're putting in retaining walls then covering them with concrete that's dyed and shaped to look like a granite outcropping! I'd love to learn how to do that. Can anyone tell me how to do that?

Question by needexercise3   |  last reply


Can decomposed granite be mixed with cement for use as structural concrete?

We have a mountainous property with no sand and very little rock other than granite. Can I use decomposed granite (as fine as sand and small pebbles) as aggregate, instead of river gravel and or sand?

Question by MikeT107   |  last reply



Sealer to weatherproof paint and gold leaf on granite?

I have a granite headstone and the gold leaf is wearing off. I thought I might use an acrylic gold paint to patch it. Is there a sealer that will weatherproof the paint and gold leaf? Many thanks.

Question by Yankazoo   |  last reply


How do you get surface scratches out of marble or granite?

Hi, An electrician worked at the house and put his 5 gal. pail of tools on the tub surround and put scratches on the polished surface. The marble co. says they have to send a 2 man team to fix it,obviously that would be very expensive. Any suggestions to avoid the expense I don't need right now? Thanks

Question by timesaver   |  last reply


Anyone know how to make a rock tumbler?

I have purchased a number of buckets of colored granite and would like to really polish them up. It doesn't need to hold a lot at once, but would be nice if it did.

Question by terriradke   |  last reply


How to lacquer or varnish a stone?

I want to lacquer or varnish a stone - it's just granite or similar, not polished, and the intention is to provide protection from staining as it's going to be used as a paperweight What product or type of lacquer / varnish / whatever what should I use please? I'm in the UK so it would help if anyone knows the trade names of products available here. Thanks.

Question by Celticonnection   |  last reply


I want to make some stone topped wine stoppers. How do you drill thru the stone?

How can you drill thru hard granite stone? I need to drill a 1/4 inch hole about 1/4" deep so I can cement a wine bottle stopper to the stone.

Question by RolloMartins   |  last reply


Computer-Controlled Appliances, Dired Fruit Rolls, Install Drip Irrigation

Computer-Controlled Appliances Dried Fruit Rolls Install Drip Irrigation USB-Powered Marble Machine Cheap Multitrack Recording Crazy Looper Grass Charging Station Variable Neutral Density Filter Wood Stove from Scrap Granite Countertops 5-Minute Bread Pudding Tesla Turbines iPad Notebook Safe Upcycled Notebook Art AC-Powered Batteries

Topic by randofo 


CAD/CAM SOFTWARE?

Hello, i am T.Y. Mech Engg. student. I want to know how software's like PRO/E are made. I mean how do they create the graphics (links of free download available graphics library's would be appreciated). Also how do they connect that(graphics) with their kernel? I know c++ already, which else languages or concepts do i need to know to create such a software? Also i would like to know how FEA is integrated in these software's. Expecting detailed reply's from all the experienced people who have worked on PARASOLID or Granite (PTC) or any other CAD/CAM software!

Question by coepian 


Is there a way to cut stone without special equipment? Answered

I have some small blocks of granite and marble that were left over from some builder's samples. I was thinking that it might be cool to make some whiskey stones with them, but I don't have any special stone cutting equipment. I don't need them to be perfect cubes or anything, a rough look is alright. Is this something that I might be able to accomplish using a hammer and chisel or by using a certain type of saw blade? I'd like to get an idea of what might work best before I run out and buy something only to find out it's not going to work like I want it too.

Question by The Rambler   |  last reply


Sanding small flat surfaces so they stay flat

Hi, I'm trying to sand fairly small wooden objects that are about 1/2"x1" and sometimes a little larger. I often find that one side is thicker than the other or the corners are no longer perpendicular. I am trying various techniques, like taking a chunk of 2x4 and wrapping it sandpaper and then vice it to my workbench. Then I rub the object against the paper block. That is getting better results.  I've read that some people use spray-on adhesive to secure sheets of sandpaper to a granite top and that it is supposed to work well. There are a few instructables that explicitly talk about sanding and I've read many of them. They advocate a bunch of techniques. I'm wondering what other folks have had success with. Thanks, Andy

Topic by AndyWilson   |  last reply


"Sonic" drilling or cutting

If we look up sonic drills today we usually get some fancy machines driving pipes in the ground, preferably softer ground.But the term includes all types of machines that use sonic vibrations to advance through a media.With the ancient and claimed to have never existed technologies in mind I did some digging...In the food industry vibrating knifes are quite common, same for "air knifes" on softer food.Even in the meat industry they find more and more uses now.Ultrasonic cutting or welding is the same thing and included in "sonic".Same for some experimental sub sonic drilling methods currently being tested.The general idea might be as old as using vibrating equippment to compact stuff, like concrete, bricks and so on.What you can compact by vibration you can also make "fluid" by vibration.Industrial feeder systems utilise this to the extreme by even making light and fine particles like flour move like water without causing any dusting.What all the techniques have in common that a suitable tool or tool head is used and that it is attempted to use the most suitable vibration frequency for the job.Anyone operating an ultrasonic welder knows the pain of finetuning for a new electrode or just new part to be welded.What does that tell us now that makes the understanding easier?Take a bottle of ketchup, preferably one that is still quite full.Turn it upside down and noothing comes out.Shake it a bit and you are either lucky or drowned in red.But hold it at an angle and start tapping it and the red sauce flows out easily.What it true for most newtonian fluids is in some way also true for non-newtonian fluids.Ever mixed corn starch and water to make these funny experiments with it?Hit it hard and it reacts really hard and is not sticky at all.Leave your hand resting on it and in sinks in and sticks to it.Stirring it very slowly is easy, go faster and you get stuck.You can do similar things with by using an external source for vibrations.For example a vibration speaker mounted to a smal cup of the goo.If you place sand on a sloped piece of plastic or sheet metal then at a low angle it will pile up easy and stay.Start vibrating the plate and the sand will start to flow off.Works fine with a vibration source mounted to a piece of steel bar or rod and a bucket of sand too.Trying to press it into the sand requires a lot of force, especially once you are a bit deeper.Let it vibrate properly and it slides rights down.If we can do the simple stuff as well as really complicated stuff in the industry then what about other materials?So far we use vibrations to make things move out of the way, compact things, transport them or to heat them up for welding plus some cutting applications.Considering the variety one might wonder why no one tries it for "difficult" materials.Machined surface can be found throughout ancient history.Finding "machined things" were vibrations was clearly used is a bit harder.The great walls are not a perfect example here as the views differ quite a bit on how they could have been created.But if we leave things melting them or a secret concret like recipe for creating for example granite then vibrations start to make some sense.You find some interesting videos on youtube where people use speakers, wires and rocks to confirm you can actually "machine" them by vibrations.Especially granite has some quite musical properties, big boulders as well as smaller ones produce destinct sounds when you hit them hard.Tests and measurements were made on granite and other hard rocks to check how fast sound travels in them , how it is refeclted and where the sound comes out or affects the surface the most.Lets just say every sample gave different results.Shape, density and dimensions affect not just the resonant frequency but also where and how the sound travels in the rock.What if??We can use a simple speaker, a plate and some rice to see how patterns form under various frequencies.Works with sand or other granules as well.The interesting patterns are the so called harmoncis.Here we see clear and destinct patters, sometimes with extremely fine lines and areas of softly vibrating granules.Some people say these harmonic frequencies have all special meanings and uses.We mainly used them to avoid problems.Imagine your new TV would not have a housing tested to be stable with all frequencies the speakers can produce.All of a sudden your back of the TV might start to rattle ;)Same for car engines.Harmonic vibrations are eliminated wherever possible.Otherwise they could multiply and affect other things in the engine or around it.Simply put it means we have various options to detect and measure vibrations on a surface or in a system.Back in the day every half decent backup generator had a mechanical indicator for the frequency of the supplied electricity.A set of tiny forks with the desired on painted red and several on either side of it.These forks were designed to get into harmonic and therfor quite intense vibrations at their set frequency.If the one for 50Hz looked blurry then all was good ;)The same principle god be applied on a big boulder of granite.Place the "vibration meter" at the desired spot and start moving around the vibration source on the surface until you find a spot that causes maximum response on the meter.Best thing here is that if you then place that surface area onto another peice of fixed in place granite both pieces will start to loose substance if vibrations are applied.The fine sediment forming is then usable as an indicator where to move the vibration source to continue once the effect literally wears off.Is it feasable?Well, if we trust mainstream science then the answer is no.A huge amount of vibration energy would be required for such a hard material, despite ancient proof that says otherwise.Semi industrial test also seemed to confirm the theory as only with very high amplitudes (loudness) and while automatically adjusting for the resonant frequency changes a measurable amount of material was removed.I struggle a bit with that as for the testing tool heads made from hardened steel or carbide were used.And that with little or no regards on how the head and tool itself affects the output.I mean in terms of having the max possible movement happening right t the tool contact surface!There is a huge difference between applying a vibration to a tool and using a system, tool and tool head DESIGNED to work at the desired frequency!Otherwise we wouldn't need a computer to design and test a horn for welding purposes or shade a knife spefically so that the vibration go along the right axis and in the right direction.You not break a hard thing with a very soft thing unless it travels fast enough to become harder as the target!This complicated explanation basically just confirms that if you hit water at a too high speed then it will just break you into pieces instead of offering a soft splashPlease do not jump of bridges or such to confirm this yourself!!If that is really true and science says it is, then how about the other way around?Works fine too, or we wouldn't have pressure washers or water cutters.Now for the part where I hope some really smart people leave helpful comments:If we can cut steel with just a stream of water, then I ask:Isn't for example copper much harder than water?Steel is much harder than copper but water cuts through it.The answer here it simple or complicated, depending on how you want to expain how it works.Comes down to speed and pressure plus the right nozzle shape to prevent a beam expansion.But then water is indeed "harder than steel".Questions:Lets say we would use a copper pipe that in lenght, thickness, hardness and diameter is optimised to transmit a frequency so the pipe end sees the max vibration like a feed horn for ultrasonic welding.Not to hard to calculate these days :)Now imagine said "main frequency" would be optimised for the pipe but also be a harmonic frequency of the rock to be worked on.The pipe end would deform quickly, abrasion does the rest and it fails before even making a decent sratch that is not copper metal on granite.No matter how hard we press nothing good enough will ever happen.BUT: If we would add more hormainc frequencies to feed our pipe we can multiply the amplitude quite easy!Just try with a sound generator from your app store, needs 2 or more channels to be usable.Pick for example 400hZ on one and 800Hz on another, then finetune around these number to hear how the tone changes ;)My theory goes like this:If all "working frequencies" would just harmonics of the resonant frequency of the granite, then they can be tuned so the effect on the pipe end is minimised.The overlaying frequencies however should result in the same effect a water cutter has: The pipe becomes ultra hard.The better the match and the more you have to get it right the harder the pipe will be.Adding now a "drilling frequency" or multiple could be used to drive these harmonics slightly out of phase.Like with the sound generator on your phone we end up with a pulsating sound, or vibration.While the pipe still vibrates at the same "hardening" mix the drilling frequency creates a peak like a jackhammer.Try it by using the heaphone output on a small speaker and placing some light and tiny things into the cone.The will violently jump around during these pulsing tones.For a drilling system the output can be mechanically maximised by utilising a pitchfork design.A head holds the vibration speakers and the tynes are tuned good enough to the frequency of the speakers.Always two would have to operate in sync though as otherwise the pitchfork movement that transfers the sound down the center bar won't work.This head could then be desgined to act as a holder for a quick change of work out pipes that are no longer long enough for tuning.I guesstimate that a well tuned design would result in a copper pipe being able to drill at least 10 to 15cm into solid granite before it wears off too much.And we are talking here about just a few mm to get the thing out of tune!But would dare to desing such a thing just to confirm a theory that no one ever really dared to test? ;)And if friction welding works as good as ultrasonic welding, then what would happen if we try this with the right frequencies and vibrations instead of wasting tons of energy?

Topic by Downunder35m 


Earthquake? Answered

Yesterday, around 7:15 pm, I heard a very loud, low rumbling noise.  I first thought it was a truck going past but it got too loud to be that.  I then thought it was the nearby military base doing explosives excercises, as they do it quite often but the noise carried on for a few seconds.  It wasn't a bang. Immediatley after it happenned, my brother who lives about 2.5 km's away from us, phoned me and asked if our house also shook.  He said his cupboard doors and glasses were rattling.  We, didin't have any shaking or even any vibrations.  We both live on the same hill and the area is full of granite rock. My other brother was about 7 km's away and didn't hear or feel anything. Now, we live in an area which has never had an earthquake, the only one was in 1969 and about 250 km away, so I have no idea what it feels like or sounds like. The nearby military base also has planes very often going over this, so I don't know if it's a "sonic boom" because I've also never experienced that. Could this have been an earthquake?

Question by Koosie   |  last reply


Custom Etched Halloween Tombstone

I created this custom etched Halloween tombstone using builder's foam, latex paint and spray paint. The method of creation is to use a water based paint to create a resist that will protect the foam from dissolving when painted with the spray paint. This technique works really well to create the weathered stone look that older limestone monuments take on after a couple hundred years. For this project I was trying to create a broken then repaired tombstone that was partially covered in moss. Project Process - First sketch the design layout using a marker. Then paint the areas that you want to remain un-etched. Next, spray the entire face tombstone with a heavy, even coat of spray paint. It will take a few minutes... but the face will be etched as much as 1/2" deep depending on how heavy a coat of spray paint. After the etching paint has dried, paint the entire tombstone with latex primer and then add any desired painted effects. For this project, I used a grey granite spray paint and then added sand that was painted a moss green color (adhering it with spray adhesive). Total active work time was approximately 2 1/2 hours. A full Instructable of this project to follow soon...

Topic by jamestown   |  last reply


The ultimate challenge?

There are always good contests available for those keen on competing, but what about a real challenge that might run for many months? I am talking about rediscovering ancient technologies and ways of creating things. We have a lot of evidence that is in massive contrast to what archeologists want to make us believe. Be it the way the pyramids were build or just in what timeframe, the use of technologies thought to be impossible at that time or just the knowledge of things like star constellations that are not not visisble to the naked eye. In a lot of areas it seems not only archeologists but also some "secret powers" try to put a hold on discovering what was really possible thausands or maybe even millions of years ago. Things like the knowledge of distand star systems that are invisible to the naked eye might never find a suitable explanation. But what about tools and technologies used to create stonework that is hard if not impossible to create with our modern tools and technologies? I dare everyone to participate in the impossible! We know thausands of years ago milling, drilling, machining and lathe work was done but we have no real clue how it was done. At times when the rest of human kind was happy using stone tools and otherwise just hunt and gather for food some areas saw an explosion in technology. Within less than a few hundert years some builders in Egypt went from simple and explainable works to stuff impossible to do in today times. Same for India, the UK and the american continent. No hardend steel tools were ever found, no machines, no evidence on the how to, just the perfect work. Here is the challenge I propose: Come up with: 1. A way to cut or drill granite and harder rocks without modern tools or tech and still do it faster and more accurate. 2. A way to match hard rocks to each other with a precision down to less than a mm - as shown in many ancient buildings preferably on a big scale. 3. A way to create delicate carvings in hard rocks, things like hollow heads less than 5cm in size or cravings with spaces of less than 3mm wide and several cm deep - as shown in many India sculptures. 4. A way to build a lathe capable or turning several tons of steel with an accuracy better than half a mm and without electrical or combustion engines. 5. A feasable way to transport and accurately position several tons of stone - again without electricity or combustion engines. 6. A way to create sculptures with an accuracy shown by the ancient Egyptian ones, meaning perfection... 7. .... I could go on but I guess you get the picture ;) The solutions could be as simple as using sound and vibration or as complicated as finding a way to create tools hard and durable enough to proove the archeologists are right after all. And before you cry out that it is impossible: Consider the evidence! We know it was done but we don't know how, so let's show the world how we at Instructables solve the problems noone can explain ;) I can't offer any real contest, prices or such but maybe someone is reading this and willing to provide the base and soem prices?

Topic by Downunder35m 


how to add a bathroom in the house

each and every home renovation challenge can be an thrilling time. not just that, it's fun, bad improve a home getting a new, but at the same time to include worth to some home and produces it additional handy for family people and guests. at any time you include a bathing room within your house, there are many factors that contractors will should look at preceding for you go out and lease one. right listed here are some recommendations for adding a bathing room in the house; 1. among the probably the most crucial considerations when adding a> Bad, problems relating in the direction of hydraulic system. should know in which the pipes and fittings are installed. You also should look at in which the pipes in relation in the direction of septic method will very likely be run. As well, you appear in the situation with regard in the direction of current plumbing related pipes within your bathroom. It 'important to be aware the fact that additional apart from current pipes, the higher the cost. It 'best to include a producer new bathing room nearbyexisting bathing room as above or below the bathroom. 2. at any time you include a producer new bathroom, look in the sizing in the bathing room so des approach to expand the home to preserve a tremendous bathing room or any space within your home at current allocated? you must also look in the fixtures and bathing room furniture. For example, you must look in the sizing in the tub and shower, if it is used into account. You must also create a graph that isshows the place in the window, sink, toilet, shelves, vanity with drawers and cupboards, linen cupboard … etc., make specific the space is huge enough to include each of the equipment you need to keep. 3. at any time you include the bath, you must confirm space the appear and design. offered the qualities such as color-resistant to moisture, type of floor, like vinyl, marble or granite, and ventilation. In contemplating the views in the bathroom, you mustIn determining no issue whether this kind of the setting up fixtures, bathing room with current and traditional with an old-fashioned look. As well, when preparing in which to set up equipment, you must maximize space, but do not create a crowded bathroom, in which consumers have problems moving. 4. energy performance can be an extra thing to consider at any time you include a bathroom. Consider, for example, reduce flow toilets, wall insulation, energy effective windows, energy saving The lighting, surroundings friendly wooden and setting up materials, as well as the range in the boiler away from your bathing room again. 5. The character in the sink and bathtub can be an extra important consideration. For bathrooms, you have individuals decisions, such as porcelain, fiberglass and metal. To sink, you can in the sink with vanity, pedestal sink and even a sink which has built attached to some wall. Bathtubs and sinks in numerous shapes, styles, sizes and colors. No issue what sort of> bad add, consider your time and spending budget for that challenge that money and spend less time. It will be also beneficial at any time you clarify in the direction of contractor precisely that which you want, and will reduce the probability of errors. As well, it is very crucial that you take advantage of pros to set up the plumbing related and electrical.

Topic by chilli0627   |  last reply


Your thoughts on "UFO's", strange things and the unknown

Don't take what comes below too serious please ;) I thought for the start of the new year it would be fun to talk about things we take for granted or that we would call nonsense. You know topis like those provided by Erich Däniken and other that think outside the conventional archiological range. Modern science has provided us with new insights into very old stuff but also a new look on things we thought to know better anyway. Here is some food for thought: 1. India... In this beautiful and old country it was discovered that hundreds if not over 2000 years ago people used lathe technology on stones. For example to make pillars with a weight over a few tons... Chains were created from molten rock and in many areas you find polished stone that even after hundreds of years still has a mirror finnish. Some of these creations are claimed to be made with hammer and chisel but how do you get a displayed accuracy that even modern technology struggles to provide? I don't want to clutter everything with video links but check Youtube and you will find temples in India showing musical granite pillars and chambers carved into solid rock with a precision that seems impossible! If that long ago human knd already knew about gear systems and lathe technology, then what else have we lost over time that we now claim as new technologies? How could anyone polish an entire granite hall and a big one that is to a mirror finnish? 2. Peru... Apart from being full of archeological wonders there is also the impossible to be found. The Nazca region shows, in aerial views, kilometer long and perfectly straight lines. In other regions, also in other continents, we can see images of strange people or artwork - again only from high above ground level. Some of the artwork is only in correct proportions and with proper contours if watched from a very specific angle to the mountain in question. The kilometer long lines are not simply on standard mountain faces but instead on top of mountain that have the top removed to be perfectly flat. And even with a lot of posible options to interpret the lines they look like any other huge, modern airport landing strips - including runways and tracks to areas we would call terminals or service bays. You can ignore all possible ways to interpret the design and possible use, what you can't ignore is the missing mountain top and level of accuracy on such a massive scale! 3. Pyramids... On all continents except Australia we find pyramid structures with very similar features in terms of proportions, angles and the way the face in a certain direction. In Egypt they just recently found another hidden chamber... Tunnels, too small for a human to fit point to stars and star signs. Some of the tools used to create were found with the help of small robots but also that some seem to be quite modern in age. Did grave robbers use them at a time were it is beleived that such tools were impossible to create? Or could they be as old as the pyramids itself? In south america we find pyramid structures looking quite similar to those in Egypt - why so similar in features and appearance if there was no contact between the two civilisations? To make things worse some of the Inca structures show tunnel and channel systems "leading" to the pyramid in question. Classic thought is that they were like tunnels to direct water or provide access in the beleive the jungle was not removed to hide the complex. Makes no sense if you see the city like areas that are now exposed and studied. I mean: how would created a city in the jungle without removing the trees?? What could make you wonder is a simulation that was performed several years ago. Based on a computer model in 3D different theories were tested. Irrigation was ruled out quickly, same for access routes or secret tunnels for the priests. One funny student got bored and decided to play god. Assuming the Inca priests would call their gods in the sky temple to provide rain he let a monsoon go down on the pyramid. The result was unexpected so he showed the results to his companions and they did the same test agin but simulated a massive airflow going down directly on the pyramid. Turned out the flow would be directed away under ground with more efficiency than systems Nasa uses today for rockets and space shuttles... Mind you the tunnels are far from straight and without this simulation it was trusted that they could not do this stuff... We now have rocket technology that uses surface direction and vector control. The square and flat designs leave a void insight that pretty much perferctly match the angles of those inca pyramids? Apart from pure coincidence, what could be the reason for this match in shape and angle with a tunnel system perfect to remove hot engine gasses? Ok, I admit, not all continents, the pyramids in Bosnia are just a hoax, so Europe is out of the race ;) Sorry Semir :) 4. Artwork... Be it here in Australia, the African desert or America - we find images of mystical people or rulers that could make you wonder. Again modern tech in the form color filtering, desitity readings and 3D scanning provided us details unseen before. If you think of gods in very ancient times and try to imagine you would be a native: What do think how many different images of their god could 100 people imagine? Let's agree it would be plenty... But if we study artwork in caves and rocks from around the world we find similarities that IMHO can't be explained. Many show features that, compared with modern technology, could be mistaken for helmets, gloves or even manual control systems. Others show things thought to be as simple as pine cones to resemble modern milling or finnishing tools. Again only possible by enhancing details the naked eye won't see. With no contact to each other and often thausand of years apart: What could the reason for having images of their gods show very similar and sometimes identical "features" ? 5. UFO technology and sightings... Some people love to post videos of secret weapons and UFO's that are simple rocket launches at a perfect time and with perfect weather conditions to attract attention. But what about the things we don't get to see? Just recently the US finally admitted to have a program to investigate what we might call "UFO activity", quite costly one too... This means a lot of leaked videos from fighter planes or spy planes you find on the net are actually the real deal. Often "enhanced" with editing tools but authentic ones have been released by the military and other organisations now too. If it happens over US ground and no US organisations admits to be flying the things we see than what it is? Right, it is a UFO - An Unidentified Flying Object! Does not mean it is alien, despite far too many people thinking an UFO must be alien :( UFO means just that! At the time of seeing it the ones seeing it can not identify the craft or "thing". And, no you are not alone! ;) Happens in all parts of the world and even commercial pilots upload what they can't explain. Oh, you are still a sceptic? Does that mean you think some of these sightings must be alien or do think someone down here uses technology we are not supposed to know of? If you are like me you might like to relax watching the live feed from the ISS. In case you are not try it anyway! Every noticed that that despite the stations own speed "forgeign" objects appear to come towards the station or even to grow in size very quickly? If so you also noticed another very strange thing... No matter what happens up there the stream keeps playing, even at times when the station is moved around a bit to avoid a possible hit with debris. But every single time something appears to move around the ISS or come close to it the feed cuts out. Ok, not every time, for well known stuff orbiting around like satellites, other stations, rocket lauchnes or supply flights they stay on. So, what are those flying objects changing course and direction or even circling the station? Why does the live feed cut out once an object is identified to be unidentified? 6. Roswell technology boom... Some think the US did take ownership of an alien craft, you know the stories and movies I mean... So called eye witness reports and some leaked documents all claim certain unknown technology in great detail. Anything from fibre optics and microchips, over "intelligent metals" to light enhancing glass lenses and seemingly indestructable fibres... Some say that if we would had the option to copy and understand the technology to copy it (without knowing anything about it of course) then the tech boom of the 60' would have been instantly. Imagine flat screen TV's and smartphones with GPS 50 years ago for everyone... ;) 7. Great land in the south - Antartica... The mysteries originating from Antartica range from Atlantis over hidden civilisations and living dinosaurs to the often claimed secret Nazi base with submarines and lost technologies. We all know that life as we know it can't really exists down there, so no strange animals, ancient creatures or a possibility to sustain a secret military base some 60 years ago. Or it there more to it?? Warm lakes containing fresh water with signs of life in them have already been discovered. Same for caves under the ice with temperatures far above freezing - constantly and again with signs of life. Ages ago the continent was still joint with other and in a warmer region so no wonder to find fossils. If we already found places that sustained life for thausands of years then what living things might be down there? Maybe even a place like the Galapagos Islands but for life thought be extinct - imagine Jurassic Park for real under the ice ;) With thriving life, vulcanos, rivers, lakes and all long before the dinosaurs it is not hard to imagine the remains under the ice and carved into the mountains. In todays times it all covered by ice and the sea level is much much higher, so again not hard to imagine that there might be rivers running off under the ice and into the ocean. Some maybe even connected to lakes in a hot spot sustaining life. A secret base from some secret part of the Nazi regime over 60 years ago?? Well, with all we know today about Antartica and is also known about the technological options available at that time it is possible. A submarine could have operated for days or even a few weeks under the ice with support ships available. Not just with so called secret tech but simply with a big sub on a minimum crew and the support of crude ways to reclaim and produce oxygen. If an entrance to a river leading to a suistainable area exists or existed at that time it would have been just a matter of time and endurance to find it. Of course we can't know if it was already found and removed or used since those with capable submarines and technology these days would not talk about it ;) But private or non government explorations map and drill more than ever, so once they hit "restricted areas" or create their own base and research station under the ice we will know ;) What to do if you actually see (or think you do) a real UFO?? Grab the oldest and dirtiest camera aou can find, mount it on the end of your longest fishing pole and create the shakiest video possible. And please make no references at all that would allow to get on the loctation, time or date. Jokes aside there is a good option these days, your modern smartphone, telescope, GoPro or favourite drone. A fake is often uploaded in very bad resolution often so low you might think an old webcam was used. Good fakes are often just a rocket launch, so check for this before you claim it is of unknown origins. Modern tech allows us to record a video in 4K at 60 or even 120FPS , so no excuse for a 320x240 AVI video LOL Optical zoom causes bad results so try to avoid it if possible. Image stabilisation can do wonders for free hand shots of moving objects, so crank it to the max even if the resulting video is a bit smaller in resolution. Geotagging is also a good thing as it allows an easy reference. You might see much more with you eye than what the video show, or in the best case the other way around. That means before you upload take a step back and try too see the video like someone who was not there when it happened! Are the movements reall that impossible? Is it really not just a plane, rocket flares? What sounds did you hear at the time or shortly after that might not be audible in the video? Sometimes a plane in the distance still is in the sunlight while you already stand in the dark - keep elevation in mind ;) Compare with other videos online that claim to be taken around the same time and area - sure you did not film a rocket launch? But if your video is crystal clear and shows the impossible in great detail you might want to check for the usual markings on military aircrafts or flashing lights in green and red. Still all good and impossible to explain? Then what are you waiting for? Tell us where, when and with what type of gear and upload the video so we get evidence of unknown technologies in the use/testing or an actual UFO - Unidentified flying object, until we know better. ;) Again don't take me too serious today but enjoy some of the thoughts and let your imagination wander off a bit. Lost technologies and knowlege exists, existed, is found again - whatever you want to call it. If humans could move stone blocks the size of a small house and create them with an accuracy down to the mm then they might have known more than we think they did. If we could melt granite to form new things, manipulate its sound or carve hollow heads of just a few mm in size then again we lost something well worth knowing. If in ancient times people had no way of seeing really distant and dim stars then how were they able to accurately map them and predict their movement? If milling and lathe technology was known and used when in other parts of the world we were happy to create simple and weak tools: How was it possible to create gears and know about planetary gear systems? If the evidence of the work clearly shows advance technologies used then where are the tools used and why can we find any written records or images of it being used? If even the all mighty US military, secret agencies and space programs fail to explain what they encounter quite often since we fly around: What is really that seems to try to hide from us while appearing to watch how we evolve, explore and fight wars? Since you still bother to read all this nonsense: If it appears we have "evidence" of the existance of beings capable of flying or even space travel since the dawn of time and add all the modern evidence: Is it possible someone or something has been watching us since humans came to be? Did "they" guide some cultures at some stage during their evolution to show us modern ways of creating alloys, machine stuff or understand what was magic or the gods at that time? And if they did help our evolution in some parts then why did this greatly improved society disappear with no more trace than their stone remains? How would we react if they dare to help us again? Is there a reason that even after countless encounters noone tried to shoot one of the UFO's down? I mean, not even a claim for trying since Rosswell..... Not any evidence of a recent landing either..... Or are we just watched so closely because they want something back we too from them??? ;) I blame all spelling mistakes on my annoyingly unresponsive keyboard. But if you still find some then feel free to keep them! I still demand a fee if use them to make money from them ;)

Topic by Downunder35m   |  last reply