indoor skydiving

Hello, I need specs on how to make an indoor skydiving equipment. I heard it needs a very powerful motor coupled with a turbine type of propeller. Maybe you are an engineer who can help. I dont want to buy. i want to make it with your help. Maybe a two person size will do. Please

Topic by Mighty T H O R   |  last reply


Soldering indoors? Answered

I'm a grade-A electronics noob, and I'm just starting my first project soon. I'd be doing it now if not for the fact that I'm doing it in an upstairs bedroom and if I know anything about soldering it's that you're supposed to do it in a well-ventilated area. Should I get a fume extractor, or is that more of a luxury? Is there a cheaper alternative? Would it be a problem that there's another house a couple of feet from the window I'll be soldering in front of? 

Question by Numbuh1Nerd   |  last reply


Indoor heating

Hi, I hope this is the correct place to ask some rocket minded guys how we can solve our fridged home problem. Our 30yr old cottage built with 2 layer perimeter brick and covered with heavy clay tiled roof becomes a freezer in winter. With restricted use of power as a result of our Govt's poor planning it gets cut at anytime and gas heaters not being safe, is there a simple way to get natural heat other than installing a fireplace at great cost that could heat all rooms?  B'lieve me guys it's ccold here even with a winter's sun outside, so solar panels or similar would need to absorb heat to distribute it all round and be very costly -  Sunny South Africa not so warm.  Muscpro

Topic by Muscpro   |  last reply


indoor fliying f1d

Intercambio y CONOCER las tecnicas de entelado entelado con polimicro y Técnicas de la USO de las bandas de goma y diseño y Vuelo de las naves echos balsa de madera

Topic by hugofhs   |  last reply


Green indoor gardening

I have had an interest in building a greenhouse like area with flouresent bulbs, automated water, and climate control. For the water i could hook up a hose on a timer to a bit of pvc but what is the best way to get proper climate control. What is the desired composition of a water? I guess the question is how do i get nutrient water and proper vitamins straight to a plant?

Topic by Mikethebuilder   |  last reply


Indoor spacial position system (indoor mini-gps)

Hi all! I'm hoping to work on a little system to allow a device to work out where it is in a room, with some degree of accuracy. I've thought of a few ideas; cameras and tracking points, sonar of some sort, and a few others, but they all have the caveat of requiring direct line-of sight, all the time. My most hopeful idea is that I could create a sort of mini GPS system, thus: A number of radiowave transmitters, perhaps FM, sit in the corners of the room, and transmit the time, or more likely something like 0-9999 in binary, all the time. My device then moves around the room, and works out where it is in the room, based on the number received by each of it's 3(?) radios, and the difference between them. There are a few potential caveats to this approach:   The radio waves may well bounce off the walls, and confuse the receiver.   The assumption is made that there's enough time between transmission of the signal and receiving to notice a difference   Obstacles to the line-of-sight might skew the difference The list is long. I don't suppose anyone has any input on this idea, do they? Graham

Topic by paradoxdetected   |  last reply


Does it make sense to compost indoors in an apartment? Answered

Or do you really need a big pile or bin outside in a yard? I imagine it would smell too strongly to keep inside.

Question by rachel   |  last reply


Wanted: Instructable for Indoor Solar Chimes

I love the ingenious people on this site and am hoping some one can help me with this.  I have desperately tried to find an indoor solar chime like the one in the photo, but the manufacturer is out of business and other imitations are simply poorly made - unsteady curled metal base, only three wimpy cheap chimes, and mostly plastic. Can any creative, engineering minded soul help me out by writing an instructable for a similarly sturdy, aesthetically pleasing, (ceramic perhaps), resonating-5-toned solar chime like the one in the photo? The premise seems pretty basic - sun hits small solar panel creating vibrations which swing pendulum like mechanism which hits chimes and creates a gentle pleasing sound. I just have I would be very grateful if someone, more knowledgeable than me, would take on the challenge or at least shoot me some ideas on how this can be created!!  TIA

Topic by smiletime 



LED Indoor Light Fixture

LED lights is a wonderful thing, but it is horrifically expensive.I bought some LED indoor light fixture for home deco. There are still have some led indoor light fixture left. I don't want to waste of these resources, so i decided to use them in my gardens. What's the difference between indoor light and outdoor lights? My these led indoor light fixture can be used in my gardens?

Topic by bella2009111   |  last reply


Instructables Goes Indoor Skydiving

The Instructables team has been going strong for a while now - some of us have even been with the company for over two years! Eric took Rachel, Eric N and me to iFly, an indoor skydiving facility, as an anniversary gift. Flying is awesome, and now we want to build an indoor machine of our own! I'm going to publish all of my Instructables in flight from now on.Here's video of the first flight we did where we were just learning how to stabilize ourselves.Here's video of the second flight we did where the instructor took us up and down, spun us around, and let us move around a bit on our own.**music NOT from noahw**

Topic by noahw   |  last reply


Resident Beehives, indoor bees?

I was watching an episode of "how it's made", they were covering commercial tomato's.  The plants were grown in a large building and the plants were pollinated by a in house beehive.  The hive was kept separate from the plants, but the bee's had access through some tubing and a hole in the wall.  Everything I've read suggests that having bee's pollinate your indoor plants is a bad idea.  I'm pretty sure most of these comments are coming from hobbyists, but the claim is that the bees get lost indoors and usually die as a result.  Can anyone enlighten me on the subject?

Question by Spaceman Spiff   |  last reply


Indoor War- What weapons?

I've observed that the majority of people think range (and reliability though this seems to be taken way too seriously) wins wars outdoors. So what would you choose for a weapon if it were indoors with a few walls and corners, tables and other cover, and probably the largest room being no larger than 20x20 meters? Just curious. I was thinking that for this reason, I'd like to come up with a shotgun. I have an idea floating in my head if anyone wants to hear it as I can't build it for the obvious usual reasons.

Topic by TheDunkis   |  last reply


Indoor LED plant lights

I am new to posting in the forums, and actually am not even sure if this is being posted in the right area. My name is Ryan, and I need some help. I have been growing spices/herbs for my own recipes for a couple years, and have always used artificial lights. I use a whole wack of those spiral florescent lights (The 23watt ones to replace a 100watt light bulb), and it works alright. I now want to create a panel of LED's so that I can increase my lumen count, and therefore increase the rate of growth. I need help with how to use resistors to get the power to what a 50 LED panel would need. LED: wattage: 1 watt Forward Voltage : 2.1V~2.3V Forward Current: 300mA. ATX Power Supply: Wattage: 250 Normal 120 volt Canadian power I want to make a panel that has 50 1watt LED's in it, power it from a modified 250watt ATX power supply, and if possible, power more than one from a single PSU (Power Supply Unit) (Something like a quick connector setup, have all resistors panel side, and have cords running to the PSU where it uses quick connectors) I want to use the PSU because I have three at my disposal. I was thinking that it would only need 50 watts or something, and I could wire it in series, however I don't know what resistors to use, or where to use them, to make the power work for the LED's. I can wire thing together, solder, and have a basic understanding of circuitry (Like power flows this direction, and this will do that...... don't know numbers)

Topic by MaXoR   |  last reply


Is there an easy way to make small solar powered lights that work indoors?

This seems like it would be easy, but all I'm finding on the web is answers that use a solar garden light to make basic "moon" jars. That's not exactly working for me: what I want is some small solar LED-looking lights, ideally a track of them, that come on at dusk in our mudroom. I've tried taking apart an outdoor solar garden light, but no luck -- wires too short, and when I tried to modify the wiring (on two testers) they both stopped working. Is there a way to buy all components needed, separately?

Question by    |  last reply




How would I make a portable indoor fireplace? Answered

I want to be economical and create an indoor portable fireplace for a lower cost then the designer fire places on the market Butane fuel or electricity would work fine. Any Ideas?

Question by puregoldner   |  last reply


Indoor Garden Ideas (or Night Gardening!)

Hello everyone! First off, I love gardening, but over the past few years I've become sensitive to light.  I am now unable to go out into the sun for longer than 30 minutes without some extremely strong sunscreen, and sunscreen only prevents my skin symptoms.  So my outdoor gardening days are: 1. Over  2. Limited to 30 Minute Sessions. I read the Ikea Aquascape Instructable, and I am currently growing some plants for my father's aquarium.  I also want to try the Garden Inside a Ball Instructable as soon as I find a ball to use. Are there any other indoor garden ideas that I can use? I have a pittie that loves to run around and knock things over with his tail, and a German Shepherd that we're watching while the owners continue to not claim him, and he is losing his eyesight so he tends to bump into things. There are a lot of great mini garden ideas, but a lot of them require counter space or tables that we can't provide at the moment. Or maybe some night gardening ideas?  Has anyone written an Instructable on gardening for people with vampirism, *cough*, polymorphous light eruption? I would really love some creative ideas.  Maybe a sturdy indoor window box?

Topic by kimmydesigns   |  last reply



Can indooor-outdoor carpet be used as underlay for wood or engineered flooring?

Can I successfully lay flooring —wood or "floating" floor— over already-installed indoor-outdoor carpet? The carpet has virtually no- pile, and I thought it would be a good insulator in lieu of underlay.  If this is a terrible idea...please don't mince words...I can take it! (I'm just working on "no-budget-reno" and the carpet looks as good or better than any underlay I've seen— plus it's already installed! : ) Thanks for any advice anyone may have.

Question by Lucyfurr   |  last reply


Advice for starting an apartment herb or vegetable garden in extremely dry and cold climate?

I live in the North and can't seem to get anything to grow let alone stay alive! We have snow on the ground Sept to May/June and between Nov to Apr the temp is usually -22F to -49F. It's extremely dry as well. As I live in an apartment, I am limited in floor space and need to keep them away from the windows as they freeze over (too drafty). It should be said that  I'm a beginner at green things - before moving up here, things stayed alive at least (maybe not flourish) but here, EVERYTHING seems to die!

Question by tibaistabi   |  last reply


All Season greenhouse?

I live in Northern, Ontario, Canada. We get only a few warm months through the summer and its fairly cold for the rest of the year, dropping down to about 40 below, Celsius!!  I have a vegetable garden in my backyard that does fairly well during the summer but I would like to be able to have fresh vegetables for my family year round. Is there any way I could build an outdoor greenhouse that I can use year round, without costing a fortune?  I also have a spare room on the upper level of my house that I could use but I don't want it to become too humid and rot my walls. Any ideas would help! Thanks!

Question by kmarrello   |  last reply


Indoor Plant Lighting Solution Needed

I'm planning on making a Instructable for the Indoor Gardening Contest, I was wondering whether normal LED lights will serve the purpose of mimicking sunlight OR power optimal/decent photosynthesis. I have normal white & blue led lights. Will they do?| If normal LED's won't work? Which lights should I use?

Topic by Jonathanrjpereira   |  last reply


LED Grow lights for indoor plants?

I have a lamp with a couple of multi-color changing LED light bulbs and I was wondering if any of the red/blue combination settings would work well for growing plants indoors? This is a photo of the type of bulb I have.  I have a couple of non-edible plants that I got at a craft store and I was just wondering if this type of bulb would work well and help them grow since I can't get these plants into direct sunlight.  Thank you Instructaverse! 

Question by tklene   |  last reply


Device to make sudden smoke indoors?

I want something that will make smoke really quick and can be used indoors, I want it to be about as fast as a smoke bomb, a smoke bomb would work if it could be used indoors

Question by metalshiflet   |  last reply


make a Kid's Indoor Jungle Gym?

Hi all, I'd love help with ideas in building an indoor jungle gym for my kids. You can see one version here, but over $700! http://www.limikids.com/ Ideally, I'd like it have a ladder, trapeze, and rings. Not sure how to make it stable--- floor to ceiling? Possible to easily assemble/ disassemble? Thanks, Michael

Topic by Michael H   |  last reply


TV antennas and what is possible indoors

Back in my young years a TV antenna was on the roof, quite big and only required to get 3 or 4 channels at best.The basic design of these Yagi antennas has not really changed since then.Same for the antennas required to get UHF and VHF channels at the same time.They either comes as two seperate antennas with a mixer or as a UHF antenna with some added loops for UHF.To talk some basics:For UHF you can get away with quite small dimensions for your antenna bits.After all a quarter wavelengths here is only around 15cm long.With VHF though we get already 30 to 40cm here depending on the channels.So called bradband antennas claim to be able to get a wide range of frequencies.That however is only true for their dedicated frequency band.If you take a normal whip style antenna then this becomes obvious - just compare the lenghts required and you realise "going the middle way" will mean neither UHF nor VHF would get any usable reception.For a long time now there is the option of so called "fractal antennas" to get better TV reception....Fractal antenna? What the heck is that?The theories behind them are about as old as fractal antenna designs that were not even considered to be fractals.Let me explain with the example of a standard FM radio antenna.For them we use frequencies from about 88 to 108MHz.And of course, for our cars they are always on the roof or mounted somewhere around the wheel arches.Some cars however does not seem to have any antenna depsite having a working radio.In this special case rest ensured they do have one, usually behind the plastic bumper bar ;)I like to go off road every now and then and lost count how many times I had to replace my antenna after getting to close to some bushes and trees.As a solution I used some thin wire to create a L-style anteanna on the inside of my windscreen.And funny enough it picks up more stations than a "proper" antenna outside.Really old design and if you think about it then an antenna with a kink that looks like L is ""self similar" - the definition of a fractal ;)More complex shapes like the Sierpinski models do exactly the same just in one more dimension.Cell phones use them as well as you WiFi router that has no external antenna anymore.Their designs and looks are so different that it is next to impossible to list the currently used shapes here.What it comes down to, when you just take a very basic flat or wire shape is that the straight single segment of the active antenna is split into one or many shorter segments that change the angle.They all have similar relations to the wavelenght still.Means really long segments might be half of a wavelength while the shortest bits are just 1/64 of a wavelength.Think of it (far too simple of course) like amny matched antennas combined into a single one.With that often comes a destinct radiation pattern, usually with a quite narrow beam angle that provides a quite high gain.Are fractal antennas any better than for example a proper Yagi antenna?You can ask 100 people and you get 100 different opinions for this one.This is mostly due to some simple facts like:Not caring about actual comparisons.Not being accurate enough when building the fractal antenna.Using just very basic equippment to compare results.For example when you have a 30 year old and quite small TV antenna on your roof and struggle with digital TV reception than you might want to just replace it all.In some case even the old rabbit ears on your TV set will work better.But take modern Yagi antenna with 12 or more segments and even station that are 100 miles away have a good chance.Comes down to possible gain, frequency match and of course how well the antenna is aimed at the transmitter.Then why is it that some fractal antennas still seem to perform so much better?The big antenna scam....If you paid attention during the intial DVB-T rollout in your country then noticed two things.a) You were told you need a TV or set top box capable of receiving DVB-T signals.b) You need a suitable antenna.Well, A is obvious but for B a lot of people got scammed badly.You see, in almost all cases the frequencies allocated for TV signal did not change at all.And an antenna really does not care if the incoming signal is analog or digital - it only cares about the frequency.But more and more local stations often meant that the trnsmit power is limited.After all it makes no sense to have a 500kW transmitter if the area to cover is only about 20 square km big.So people were told they need new antennas once the noticed digital TV is more like playing Tetris, blocks everywhere....You analog TV had no problem with a slightly weak signal, you did not really notice it unless the weather was really bad as well.All the benefits of digital TV however only work with a proper signal strength.If your areas still has both analog and digital TV channels then have a look on how your local transmitter provides the signals ;)Part of the big scam was hiding a very simple fact:All analog TV is transmitted in a horizontal orientation while almost all digital TV is transmitted in a VERTICAL orientation.Ok, we already gain and ignored it but why would the orientation be important?Your radio antenna is vertical because the FM signal is transmitted the same way - the "waves" if you like go up and down like a sine wave.You still get reception if you turn the antenna 90° to make it a horizontal one but you will realise that weak station are no longer available.The same happened with digital TV.And if there is only digital TV left in your area then simple turning your antenna 90 on the mast to have the single elements vertical instead of horizontal gives you top reception again ;)If you struggle to get all station then just try it out before buying a new antenna ;)Modern fractal TV antennas come paper thin and often with rediculous claims in terms of gain and range.On Fleabuy you can even find models claiming to get stations from over 2000 miles away LOLSome even come with the fake claim of being omnidirectional, meaning it does not matter where you place them or how you orient them.A fractal antenna can't change basic phsyics though...High gain mean highly directional or at least with a very flat radiation pattern instead of being more like a sphere.A high bandwidth means you compromise on the gain and/or the phsical dimensions.For example a thin whip antenna is quite limited in the optimum bandwidth while a piece of tubing provides amuch higher bandwidth but at the expense of gain (and some other problems).A fractal antenna can compromise between the two worlds much better than anything straight.And you would even need to make the traces on the plastic extremely wide because you can simply add different lengths for different frequencies.Means a wideband fractal antenna for FM, VHF and UHF basically is three different antennas combined into a single one.It also means that there is usually always more than just one single element of the antenna that is receiving a signal.If you experimented with WiFi antennas for your router or modem than you certainly found the famous Pringles can antenna - highly directional and with an insane amount of gain.Works exactly like a simple directional microphone.And you could, at least in theory do the same with a TV antenna - if there wouldn't be the problem of the wavelenght.A pringles can works for WiFi because the wavelenght only requires an antenna of about 3cm in lenght.You might not want a row of steel drums with a diameter of around 80cm on your roof just to watch the news though...Ok, if I need a new antenna anyway then should I get a fractal antenna or not?I try to make it simple:Roof option not possible or too costly AND your transmitter is not too far away then try one of the cheap paper thin antennas you find online.If you already have an antenna on the roof that is suitable for the frequencies you need then check it to know if it is still any good.With age and weather comes corrosion and some antennas are connected badly in this regard.Sometimes you are lucky and all it takes is to cut off a few cm of cable to get back to clean copper and to give the terminals on the antenna a good fine sanding or a wire brush treatment.In other cases you might find an amplifier under the roof that has faulty power supply ;)And well, certain animals love to chew through your cable...If all is goo from antenna to TV then as said try to flip the antenna 90° to get it vertical.No, I did not mean to point it up to the sky..... ;)I mean rotate it around the x-axis if X is pointing in the direction of the transmitter...

Topic by Downunder35m 


Need advice on material for an indoor firepit?

I'm looking at building an indoor firepit that uses ethanol fuel. I have it all planned out and everything but need advice on material. It will basically be a hollow sphere that is open along the front and sides and will have the ethanol fuel can placed into the bottom. This will all be supported by wooden legs. I'm thinking of using a clay straw and sand mixture (COB) because it's very strong and fireproof  but I'm not sure if it's the best option. Does anyone have any ideas?

Question by abenoit   |  last reply


Can a solar light be charged indoors?

Hey guys, Can a solar panel like this be charged with indoor lighting, like a calculator is, or does it need to be actual sunlight? Its rainy and cold in Canada, and need to know if I can just sit it on the kitchen table all day (the light is on anyway) and charge it up. Working on a Sun Jar, and have disassembled the outdoor solar light. I want to know if the panel/battery/light is in working order (I found an opened box at H.D. on sale for 1/2 price!) :) Thanks

Topic by Fast Eddie 


Hardware/software for indoor digital signage?

Hi, What I would like to build is a digital signage kiosk. I am using a 32" LCD display and wood for the housing but I can't figure out in which direction to go regarding the hardware/software which would breath life in this stuff. Room is not a problem inside the housing, so I could go mini or a normal pc, x64 or ARM. The interface would be rendered in HTML (+java script for animation), which would contain some short (1-2 minute) video clips, but overall the requirements are not that big. So here comes the software decision: windows or android??? Android with smaller lighter (energy saving) hardware or the ARM powered Raspberry Pi is tempting, but maybe in the future I would incorporate touch capabilities which may need a more sophisticated hardware...I am confused, which way to go???? Regards, vedtam

Topic by vedtam   |  last reply


How do I make finished compost indoors?

I can't have a compost bin or pile or bury food scraps in the garden due to bears & raccoons. Can I make finished compost indoors?

Question by DottieM   |  last reply


How might I build an indoor living wall?

I was thinking about the research that was done regarding improving indoor air quality, and one idea piqued my curiosity, and that was the concept of a "green wall" also known as a "living wall."Some links:http://en.wikipedia.org/wiki/Living_wallhttp://appsci.queensu.ca/ilc/greenBuilding/greenwall/greenwall_03.phpGreen wall photo:http://www.ozoux.com/eclectic/archive/2006/10/30/images/greenwall.jpgI'm wondering what the feasability of such a thing would be for a residential home, using items that are either recycled or easily obtained from say a hardware store. I am aware of being able to purchase setups, but they cost a fair bit of money and I thought it might be more interesting if I might construct one myself.

Question by ikaruseijin   |  last reply


does anybody know how to make a small, indoor, remote control plane? Answered

I want to make a small remote control airplane. i have havoc helis but i like airplanes better and i dont know where i can buy any and i would rather make one. so tell me what you know. thanks!!

Question by EncasedDeath   |  last reply


Super Bright Night Light

Who makes the brightest night light?

Question by  


Any way to use this mobile cb radio indoors?

A friend gave this to me but I don't have a car, any way to convert it to AC current to use indoors?

Question by buffysissy1   |  last reply


Can indoor Romex be used in conduit for outdoor use?

My friend is adding motion sensor lights outside at our house. He plans to install conduit in the garage, and use indoor 14/2 Romex, Type NM-B Indoor. He then will add the same outside to the security light fixture he is installing. Can indoor Romex in conduit be used for this? We live in the desert in Southern California, where temperatures can get over 120 degrees in the summer.

Question by    |  last reply


how to grow a pineapple indoors/ how long till it grows?

I am trying to grow a pineapple indoors for my son's science project. Does anyone know how long this takes or have any pointers?

Question by marthaphillips   |  last reply


looking for ideas on fabric composite thermal barriers ie artic sheltering?

Looking for moderately light weight, flexible,  and not too expensive Want to build a modular out building that I can take apart and transport, but be nice and toasty in the winter when using it. Thinking of a yurt type structure, but want to optimize the wall and roof covering

Question by diverorion   |  last reply


Does anyone know how to make plant tension rod hangars

Does anyone know how to make plant tension rod hangars with adjustable plant hangars?  The rod can be a shower rod, but I can't figure out how to EASILY make the plant hangar part.  See photo of one from Miles Kimball for more detail.  Hope I'm not out of line in asking this here, just looking to do this myself. Thanks.

Topic by nwmshp   |  last reply




Setting up Indoor Soldering Iron Station

I'm interested in having a place to work on electronics projects inside, and was thinking about building a workstation in my room. I would be soldering, and doing all other electronic-related activities at this workstation. I was wondering what I would need to do to make this happen in a safe, productive manner. Any suggestions?

Topic by Gjdj3   |  last reply


Wiring an indoor extension cord to a small switch?

Hi - I need to take an indoor extension cord like this and wire it to a switch like this. I'm assuming I can just cut one of the two wires within the extension cord and connect either end to a prong on the switch.  Actually, I'm almost positive that will work. The real question here: is it safe? So, will this switch be able to hand the electricity from the outlet running through it? Thanks, Adam

Question by Adambowker98   |  last reply


Indoor fireworks made easy - build a ziltch

My second video will show you how to build a Ziltch (quite a nifty trick actually).Make sure to check the video; you'll be amazed what you can do with just a plastic bag:http://www.metacafe.com/watch/384634/indoor_fireworks_made_easypart_i_the_ziltch/Please leave a comment if you like it,Sam

Topic by sam noyoun   |  last reply


holiday inflatable - giant floating (indoor) balloon

 We have a Gemmy inflatable at work (a giant Homer Simpson -- about 8 feet tall) and we were wondering if we could somehow fill it with helium and float it on the ceiling. We're concerned that it's too permeable (when the fan is not going, it deflates FAST).  One idea was to coat the inside with polyurethane (turning the fan on to blow it throughout the balloon) but that seems like it wouldn't work very well (too patchy), and could make it too heavy. Another option would be to take a bunch of balloons, insert them into the Homer, and then inflate the smaller balloons (and tie them off). Any other thoughts or suggestions?

Topic by jeffreality   |  last reply


Indoor buzzing door opener with multiple openers

Hey guys, i would really like to have an instruction on how to install and customize a buzzing door opener. i´m kinda a lazy person and i want others to respect my privacy. My family is constantly rushing into my room in the most...lets say awkward situations :D I want the door to my room just to open from the inside or from the outside when pushing the open button. On should be near my pc and one should be near my bed. This would work perfectly if i get one of this buzzing door openers which are used to open the main door to the house. But i dont wanna replace my hole door. Just the metal part where the lock is. Also it would be neat if the openers where wireless. And the lock should work like a normal lock: I put in the key and i come in from the outside like a normal door =) Any one brave enough to take this challenge?

Topic by mpott1   |  last reply


Growing Veg indoor from your smartphone

Hey guys! My name is Aga, and I wanted to post an update about the project I shared a while ago. So we were looking for ways to make hydroponics fun, easy, interactive and beautiful so everyone can start growing the freshest food on earth even if they know nothing about gardening or have very little time and space.Of course we would rather garden in sun but for most of us it`s simply impossible. We are still early stages but at least now it looking good. haha! Check it out our new landing  http://getniwa.com/ We are gearing up for a Kickstarter and if our vision resonates with you would love your support! Also: check out our blog - how far we have come from the initial prototype http://blog.growot.com/ and here is me telling a bit more about the project straight from China: http://bit.ly/1eVO5Oh Thank you guys! Would love to connect with you and know what you think about the project Aga ps. this is not the spam, we are a bootstrapping startup and would love to share our solutions with the community!

Topic by Niwateam 


hydro contest entry

Hello, I am trying to enter a instructable in the hydroponics/ indoor gardening contest, and it has been accepted into the manly crafts contest, but not yet the hydroponics/ indoor gardening one. is there anything I can change to get it into that specific contest? it is a addition to our indoor aquaponics system, and I think it will fit very well into this contest!

Topic by Sokota   |  last reply


Removing Aphids? Answered

My indoor Mint garden has aphids!!! I pulled 10 -20 off (all I could find) but I'm sure there are more!  Also, I am worried that Ladybugs would die because it is a small plant (pot is 6x18 inches)  and indoors.  Furthermore, it is winter and freezes so the mint will die outside. How can I kill the aphids but still be able to use the mint?

Question by tincanz   |  last reply