Toolsthatbuild

You can pour at the same time or pour in layers after cured depending on the desired outcome. I have a new River pour video out that explains a lot of your new I recommend seeing it before starting.

Sorry for the late reply but sealing the wood before pouring the cracks will help and sanding off any undesired epoxy. The biggest way though is pour carefully with a small vessel

Yes stronger than wood

Sorry for the late reply, depends on what type of epoxy you are using. Some epoxy max depth is 1/4” so it’s layered and cured. Some epoxy can pour 2-3” deep. I have a new video that’s much more detailed on my YouTube.

Hey, Yes I do. I have attached the video to the Instructable, I highly recommend checking it out.

The torch is the ideal way. It’s not just the heat that removes the bubbles. A heat gun can be used if you keep in mind the fan from the heat gun will blow the epoxy around as well as blow any dust and debris into the epoxy. In the video I use a heat gun but it doesn’t work as well as a torch would.

Hey thank you. I used a .25mm ball tip for the lines. You could probably get away with a shallow v bit though.

Thank you. Hope your table turns out well! I’ll be doing an advanced epoxy video through YouTube soon if you need some better pro tips.

Yikes what did you use for joining the boards? This is my third time building a similar table and in several years never had separation like that. Maybe our humidity swing isn’t as bad as yours.

Hello thank you. I tried to keep this project very diy friendly so the paint I used is standard Behr latex paint (Color name is Carbon) and I used a foam roller both available at any hardware store.

Thank you! The real wood and joinery will make this last so much longer than those faux chip tables.

Thanks it’s an Incra T-rule this is 3” but it comes In 3 sizes

Thank you! Please vote for it

Awesome hope it helps

Absolutely it works really well

Great idea! I guess any serrated blade would work better

Absolutely works great!

For mold you need bleach or a pre mixed store bought mold solution. It’s a living thing that needs to be killed as well as removed. Cut the sponge in the same way.

Thank you

Works great! Hope it helps!

Hope It Helps! Please vote for it in the spring cleaning contest!

This is not suitable for corona virus. You need at least a p95 Level mask. Please don’t advocate for anyone to use this for corona virus.

thank you

Absolutely better, there’s so many combinations you can do, I’ll have to try your recipe.

You eat them cold straight from the jar, you could heat them if you wanted with the lid off but usually just cold.

No problem, hope you like them!

They are my favorite breakfast! Thank you and may as well mention the cutting board is for sale.

You eat them cold straight from the jar. I didn’t think I would like cold oatmeal either but I highly recommend you try it.

No problem, it's been added

That’s a very basic template no lines no set hole size or depth. This is a completed design with lines and everything set. You won’t find one in any of your links