246Views8Replies

Author Options:

Help with controller circuit for galvanic etching machine? How can I eliminate the halogen lamp from the circuit? Answered

I want to put together an electroetching rig (as detailed here), and I already have a battery charger, but I need to make the controller (diagram attached).
My question is: Is there a better solution for the circuit than having an 12 volt halogen lamp wired in? That just seems really clunky to me, and my gut tells me there's a better solution that is not "go buy a laboratory power supply". I have nothing against old-school, but this looks positively prehistoric. Anybody?

Discussions

0
None
steveastrouk

Best Answer 8 years ago

Well, you COULD build a big linear current regulator, but you're not going to change the basic physics of the thing, and you'll still have to dump a lot of heat somewhere. The ultimate answer would be a switch mode PSU, but that's a lot more effort than buying one.

0
None
RavingMadStudiossteveastrouk

Answer 8 years ago

Are you sure there's nothing more elegant out there, possibly involving an 18V cordless drill motor, an Arduino and a 55-gallon Altoids tin full of saltwater?
Yeah, OK. I was afraid of that.

0
None
steveastroukRavingMadStudios

Answer 8 years ago

Try Ebay first. Its the controllability that stuffs the chances of an easy solution.

Steve

0
None
RavingMadStudiossteveastrouk

Answer 8 years ago

I'll go have another look, but I'll probably just wind up going with the halogen bulb. I'll just be sure to wear my steampunk goggles while I'm etching. Thanks for your help.

0
None
NobodyInParticular

8 years ago

You should be able to find a computer power supply for $0 to $20 on Craig's List.

True, but I'd still have to build a controller for it. Besides, I have a perfectly good battery charger already. Might as well use it, unless I can get a lab supply for less than the controller components will cost me.

0
None
ScubabubbaRavingMadStudios

Answer 8 years ago

because if you fry a free computer power supply experimenting with the altoids tin full of saltwater, you don't have to buy a new battery charger!

Put the light in a Easy-Bake oven and make cookies while you etch.

0
None
RavingMadStudiosScubabubba

Answer 8 years ago

Good point, I do rather like my battery charger. And everybody likes cookies.