11079Views9Replies

Author Options:

How can I find cheap electric motors? Answered

For an upcoming project(lathe) I need a 1/4 or 1/3 hp motor around 2000 rpm. Are there any tricks to getting them for cheap. The cheapest one Ive seen is 84 bucks.. 

Discussions

0
None
steveastrouk

8 years ago

Washing machines are a really good source of motors for lathes. Our first one was powered with a washer motor for years, until we went three phase. An older motor, with its speed controller would be a sweet find - try the local waste site, or ask on Craig's list or somesuch.

0
None
imthatguy1125steveastrouk

Answer 8 years ago

I would use a washing machine motor but I dont have the skills to make the speed controller.

0
None
Re-designimthatguy1125

Answer 8 years ago

Then use a pair of 4 step pulleys and speed control the old way.

0
None
Hiyadudez

8 years ago

A drill motor. You could pick up a cheap drill from a second hand store, or maybe a garage sale or eBay.

0
None
imthatguy1125Hiyadudez

Answer 8 years ago

I wouldnt think a drill had enough torque to spin oens and chess pieces

0
None
rickharris

8 years ago

A drill motor (mains powered) may not have the torque to drive a lathe of any size, 1/2 to 1 Hp is more normal for a lathe that is more than 12 inches between centres.

If you have got the rest of the lathe fairly cheap then I suggest investing $80 in a decent motor isn't going to be a bad deal especially if your electrical experience is low.

0
None
steveastroukrickharris

Answer 8 years ago

+1. Its the swing over bed that suggests the power rating to me

0
None
yokozuna

8 years ago

Treadmills- You'll find them for free on craigslist all the time, and they should be quite sufficient to suit your needs.