bertus52x11

Nicely built!

Hi Joeinstructables,nice built yourself! I'm glad you liked the design and it has helped your mom!Good luck!Bertus52x11

I'm not sure if there is a device available the causes vibrations. Sparkfun might be a good source to start your search. The box I got form an electronics shop (but it was grey when I bought it.

Try Google for the most recent conversion between Euro and Dollar...

Nice one! I'm going to build it (slightly larger).

Nice one! I'm happy that you made one. I'll send you a patch...just because ;)

I'm not sure if I understand your question correctly. The trailer as a special connector: https://burley.com/hitch-guide/Look at the "classic" one. It does not interfere with any drop out as it is attached to the cycling frame. Just let me know.

Ok, I understand. The distance between the pads of the drop out is 9,9 cm. The pads themselves are approximately 4 mm thick.Hope this helps.

I used 1,5mm thickness of Al sheet. The bag I transported was around 25kg as the weight was nicely distributed. If you would concentrate this weight, the sheet would certainly bend. Another tip: add some few extra Zip ties (read my Note 2 in step 5).Finally, now I have laid a loose sheet of PE on top as Al gives nasty stains to the fabric of your bag.

Sorry. I kept it for a few years for "you never know". Then I moved houses and cleaned up my garage...Good luck!