post or not

Want me to post the sgt`s ak-47 it is very powerful.

Posted by T-man 11 years ago  |  last reply 10 years ago


Post?

Https://www.instructables.com/id/Slingshot_Rifle/

Posted by stlrams28 10 years ago  |  last reply 10 years ago


posted

Yay! finnaly posted my semi-auto knex gun i think its a new design because it uses a hammer :P be sure to check it out!

Posted by ryan knexer 11 years ago


First post!

. Hi, everybody!

Posted by NachoMahma 9 years ago  |  last reply 9 years ago


Reply, and posting

I have been having intermittent problems posting either to the forum or as a reply using either Chrome or FireFox.  It seems to have gone for now, so I am not sure whether that means it MUST be on my end, or that something is not loading properly sometimes when I sign in. 

Posted by Goodhart 7 years ago  |  last reply 7 years ago


How to post

Hey, how do i post an instructible into a group i created? and also how do i post into a grop i joined

Posted by Kendallkip 11 years ago  |  last reply 11 years ago


binding post

I need some binding post/banana posts (preferably something that an aligator clip can easily attach to). Does anyone know a cheap place? The cheapest were about 30 cents apiece, but shipping was like 5 dollars, if this is the cheapest then I'll buy it, just that I don't want to.

Posted by guyfrom7up 11 years ago  |  last reply 11 years ago


Posting An Instructable

I published my instructable two days ago and it is still not showing... What should I do? By the way it says published on my account.

Posted by jollyrunner 6 years ago  |  last reply 6 years ago


PVC Post

Hi, I'm a soccer coach.  I'd like to make some inexpensive posts to serve as obstacles/markers that I can use indoors.  I have 5' pvc pipe, but can't seem to locate or concoct something to hold the posts upright both affordably and that aren't too wide to get in the way of the players or the soccer ball.  Ideally, I'd have something that is only a few inches wide with a 3/4" hole in the center to hold my 3/4" pvc.   Thus far, the best thing I can come up with are a few 2.5/5lb thick plastic weight plates where the center hole happens to be just about 3/4" wide.  Those seem to quite difficult to come by though!  The next closest thing I've found were either heavy steel flanges or rubber mounts specifically designed to hold plastic posts.  At $8 or more/each though, I was hoping to find something a little less expensive. Anyone have any ideas? 

Posted by DDallen 2 years ago  |  last reply 2 years ago


Words will not post

When I make an instructable, I type a big long paragraph and then hit preview. Then the preview page is blank. I hit edit again and the words are still there. When i posted my instructable the words are gone, but people are posting already so what do I do????Part of my instructable is missing

Posted by Johnny Rex 8 years ago  |  last reply 8 years ago


Future posts?

Is it just ,e or (at this time) did tech king post comments over -300 minutes ago?

Posted by guyfrom7up 10 years ago  |  last reply 10 years ago


When Was It Posted??

Is it just me, or did the instructable "Posted On" date get taken off of the pages? Why? Just curious, Jeff

Posted by AptPupil 3 years ago  |  last reply 3 years ago


instructable not posting!

My instructable "the pyro system" is not posting. its published but not showing. its been days now, whats wrong? please help

Posted by budsiskos 10 years ago  |  last reply 9 years ago


can't post

When i click on post reply the little twirl around starts and continues for as ling as i leave it on. it never posts. i feel i have a lot to contribute with 50 years of electronic experience. i teach electronic theory to those people wanting to obtain their ham tickets. my posts are always nice. i don't get it.

Posted by kadris3 10 years ago  |  last reply 10 years ago


posting diagrams?

I have lots of designs i have not gotten around to building can i post the diagrams as an instructable?

Asked by ishner 5 years ago  |  last reply 5 years ago


Instructables are not posted

There are quite a few of us out here that have made instructables, it says that its published, but when we look it up, it is not there. PLEASE HELP

Posted by Wingmaster700 10 years ago  |  last reply 10 years ago


can't post!!!

Ive had spotty posting lately. every once in a while, the site will bug up and it will say "bad gateway" or something. Is it just me?

Posted by Epeoples 9 years ago  |  last reply 9 years ago


Posting Limit

Wondering if there is a posting limit for Pro members. I know in the past if we tried to upload more than 3 instructables on any given day (with our non-pro account) we got an email telling us we couldn't.

Posted by powerbookmedic 9 years ago  |  last reply 9 years ago


BAW is posted.

For those of you who don't know, I posted Dunkis' BAW. Here. I just added a 'modifications' section too. Here.

Posted by travw 9 years ago  |  last reply 9 years ago


Slow Posting

Hi guys i published an instructable 3 days ago and it hasnt come up yet is there a problem with it or do i need to resubmit?the contribution in question is this onehttps://www.instructables.com/id/molded_mouthpiece_for_blowgun/

Posted by lennyb 10 years ago  |  last reply 10 years ago


Posting a picture

What does it mean when it says "main image is required to publish"? Also, how do i do it? I thought it would be in the "attach a thumbnail" segment but i have no idea how to attach an image...

Posted by jlocker 6 years ago  |  last reply 5 years ago


post spam

I have 494 comments on April 10, 2010 EST spam here to be my 500th commenter

Posted by cj81499 8 years ago  |  last reply 8 years ago


Trouble Posting

I have been having extreme trouble posting anything (comments, forums, Instructables) for some reason instead of opening the link for the comment box, it just refreshes the page. I can't upload anything either. This isn't happening on YouTube. Any ideas what's wrong?

Posted by KentsOkay 11 years ago  |  last reply 11 years ago


OK to post?

I made a suppressor/ recoil compensator for a Umarex Steel Storm bb repeater pistol and would like to post the how to. Is that OK? It is relatively esy to build, and being made from household and hardware store parts, it is very inexpensive as well.

Posted by gtfoxy 6 years ago


post a poem

Enter a poem that you have made up not one that you copy and pasted, keep it on topic please. 

Posted by golddigger1559 9 years ago  |  last reply 6 years ago


Posting to pintrest?

I was looking for an easy way to pin my instruct able to my pintrest account.  When I try to pin it, the only photos that come up are the ones for the add on my instructable.  Any ideas of how to get around this?  It would be great to not have to write it up separately. Thanks!

Asked by mybell125 7 years ago  |  last reply 7 years ago


Is it ok to post it?

Hey Instructables! So a couple of weeks ago I finished a year long project, automating my room. The project is completly modular so if any piece burns out or fails you can quickly switch it, the project includes automatic lighting controlled via a PIR sensor, an LM35 controlled fan, a miniature green house controlled by another LM35 and it displays the info about humidity and temp, through a 16x2 lcd and DHT11, a combination lock for my door via a keypad, a infrared control that can turn on or of my desk lamp, alarm clock, room lights, solder station and has the function to turn the whole system on or off, it also includes a modified Sony alarm clock, that has a TDA2040 amplifier with aux in and its connected to some speakers around my room. I have all the eagle files and ready to print pdf´s. Everything is controlled by 2 DIY arduinos. I made most of the modules for the sensor array but a couple of the controll modules were made using already existing files on fritzing, and the DIY-Duino https://www.instructables.com/id/DIY-Arduino-or-The-DIY-Duino/ Should I redesign this modules and controller board before uploading, or will crediting the authors of this parts will do?

Posted by GG_Beta 5 years ago  |  last reply 5 years ago


Cheap Easy CNC: To post or not to post?

That is the question. It will look something like the one pictured, and will be a combination of this, this, this, this, and many months of research. It will be cheap, under $300 easily. I want to know if I should do an 'Ible before I make it so I can take pictures. What do you think?

Posted by snowpenguin 9 years ago  |  last reply 4 years ago


Double Click to Post

Recently i've been having to double click on the post button to get any posts on the Q&A or Forums to post. It's like the site isn't receiving the first click. It's happening across multiple PCs in different locations (ie miles apart). I've cleared internet and java cache with no change. Before this was happening i'd post a comment and the comment would be posted and the text field would still show what i had typed.

Posted by mpilchfamily 4 years ago  |  last reply 4 years ago


My instructable post

Okay so I made an instructable and published it and everything but it still has Zero views and i posted it aa while ago. Also Whenevr i log out of this account and then try to find my instructable i can not find it. It my instructable private it to me or what. Whats going on. Thnx

Posted by north33 7 years ago  |  last reply 7 years ago


Halloween Post Card

Does Eric still send out Halloween Post Cards? I miss those.

Posted by Yerboogieman 2 years ago  |  last reply 2 years ago


ideas of things to post

Hello there! its been a while since ive been on this site and im looking for things to post, so i decided to make a forum where if you want me to make/post stuff you can leave your idea in the description area below, NOTE: i would most likely only do things involving knex, legos, or basic instructions via text and pictures

Posted by mr. 707 6 years ago


Post not showing up

Hi, I published an article on Saturday and it's still not live two days later. I've sent the team an email and tweeted at them but no answer. https://www.instructables.com/id/Emergency-Candles/ Any help appreciated.

Posted by Go Repairs 5 years ago  |  last reply 5 years ago


Post your Workspace

The question is simple: Where do you do your DIYing or MAKEing? Pictures of my area below.

Posted by Firebert010 10 years ago  |  last reply 10 years ago


Should I post?

I made a paintball extra parts/problem kit.Should I post? DUHAnyone find this useful? DUHShould I post a begginers guide along with it too? Um?Help, I will love any feedback!

Posted by mg0930mg 9 years ago  |  last reply 9 years ago


How long does it usually take to get posted? Small size 'able.?

Asked by HAL2.0 9 years ago  |  last reply 9 years ago


Where are Contests posted?

Where are contests and competitions posted?

Posted by LoneWolf 8 years ago  |  last reply 8 years ago


comment posting not working

I cant get my comment to post. i have tried to post it multiple times and it doesn't post

Posted by emms85 7 years ago  |  last reply 7 years ago


Moving blog posts?

Can I move a post from blogger to instructables?

Asked by Linda Theil 4 years ago  |  last reply 4 years ago


posting pictures for a avatar

Yeah im new and need help so please post and reply

Posted by the-weird 11 years ago  |  last reply 11 years ago


GOODHART post an instructable!

Post one NOW! lol.

Posted by DELETED_DELETED_kruser495 11 years ago  |  last reply 11 years ago


Post button not working

The "post comment" button on some 'ibles and the "reply" button sometimes are unresponsive and when they do work are sluggish. What is wrong?

Posted by waterlubber 6 years ago  |  last reply 6 years ago


A post that is blatantly an advertisement

Sorry to post this here, but there is no other way to bring this to the site managers' attention. This post, https://www.instructables.com/id/Designer-Prom-Dresses-Prom-Dresses-2013/, is an advertisement for the posting organization, and not an 'ible at all.

Posted by WriterChick 6 years ago  |  last reply 6 years ago


PDF Downloads and Posting

PDF downloads VERRRY SLOOOOW. Computer nearly locks up. Couldn't post on Welcome forum. I am using Win7 and IE8.

Posted by Lazarus.Matova 8 years ago  |  last reply 8 years ago


posting date on instructables

Is there any way of changing the posting date on an instructable? i was working on one and it's post date is when i started it rather than when i published it. or, is there a way to look at instructables by publishing date rather than posting date so that i can easily keep up with what is new?

Posted by jtobako 11 years ago  |  last reply 11 years ago


Can I post this? Answered

I like to make robots and haven't posted ANY good instructables. I'm in the process of making a personal butler robot but it combines three different butler robot instructables. Can i post a instructable of it?

Asked by connoboarder 6 years ago  |  last reply 6 years ago


How to post an instructable

Whenever I want to post an instructable I can't go anywhere from the save and add first step.. What happened??

Posted by Ningko 10 years ago  |  last reply 5 years ago


Posting Gungun =~ p

Posting!

Posted by Mintyhippo 11 years ago  |  last reply 10 years ago


should i post?

Here

Posted by heat-seeker 10 years ago  |  last reply 10 years ago


should i post this?

Hi i recently made a  new gun and kind of wan't to post it but i don't now if its worth the effort 

Posted by legomman200 8 years ago  |  last reply 8 years ago